BM10B(0.6)-40DP-0.4V(75) Hirose Electric Co Ltd, BM10B(0.6)-40DP-0.4V(75) Datasheet - Page 9
![no-image](/images/manufacturer_photos/0/3/300/hirose_electric_co_ltd_sml.jpg)
BM10B(0.6)-40DP-0.4V(75)
Manufacturer Part Number
BM10B(0.6)-40DP-0.4V(75)
Description
FFC / FPC Connectors 40P 2 ROW HEADER SMT VERT .6MM HGHT
Manufacturer
Hirose Electric Co Ltd
Series
BM10r
Datasheet
1.BM10NB0.6-60DS-0.4V75.pdf
(11 pages)
Specifications of BM10B(0.6)-40DP-0.4V(75)
Connector Type
Header, Outer Shroud Contacts
Number Of Positions
40
Pitch
0.016" (0.40mm)
Number Of Rows
2
Mounting Type
Surface Mount
Features
Solder Retention
Contact Finish
Gold
Contact Finish Thickness
-
Mated Stacking Heights
0.6mm
Height Above Board
0.020" (0.50mm)
Lead Free Status / Rohs Status
Details
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
BM10B(0.6)-40DP-0.4V(75)
Manufacturer:
Hirose Electric Co Ltd
Quantity:
12 000
■Usage Recommendations
1.Recommended temperature profile
2.Recommended manual soldering
3. Recommended screen thickness and open
4.Board warpage
5.Cleaning conditions
6.Precautions
area ratio (Pattern area ratio)
BM10 Series●0.4 mm Contact Pitch,Stacking Height 0.6mm 0.8mm Board-to-Board /Board-to-FPC Connectors
Note 1: Up to 2 cycles of Reflow soldering are possible under the
Note 2: The temperature profile indicates the board surface
Manual soldering: 340±10ç for 3 seconds
H=0.8mm Header, Receptacle :Thickness 0.12mm
* When using nitrogen-reflow, 75% only at the header side.
H=0.6mm Header Thickness 0.1mm
* When using nitrogen-reflow, 75% only at the header side.
Maximum of 0.02 mm at the connector center, with both ends of the
connector as reference points.
Refer to “Nylon Connector Use Handbook”.
■ Mating and un-mating of the connectors when not soldered on the
■ Mated connectors should not carry weight of the board by
■ When mating/un-mating do not twist or lift by the corners. Apply the
■ Exercise extreme caution when mating/ un-mating when the
■ Do NOT pull on the flexible substrate.
boards is not recommended as this may cause deformation of the
terminals, damage to the contacts or insulators.
themselves. Provide some other support of the boards.
forces evenly across the entire length and width of the connectors
taking care NOT to damage or deform soldered terminations.
connector is mounted on a nonrigid (flexible) substrate.
Slight discoloration on the insulating materials will not affect form,
fit or function of the connectors.
Room temperature
same conditions, provided that there is a return to normal
temperature between the first and second cycle.
temperature at the point of contacts with the connector
terminals.
Temperature (ç)
250
200
150
100
50
0
Receptacle 0.12mm:Open area ratio 100%
150ç
50
:Open area ratio 100%
90~120sec
100
180ç
150
250ç
220ç
200
60sec max
250
Time (sec.)
300
9