CV500-COV03 Omron, CV500-COV03 Datasheet - Page 54
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
CV500-COV03
Manufacturer Part Number
CV500-COV03
Description
CONNECTOR COVER
Manufacturer
Omron
Datasheet
1.CV500-COV01.pdf
(182 pages)
Specifications of CV500-COV03
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
CV500COV03
- Current page: 54 of 182
- Download datasheet (2Mb)
Assembly
The CV-series CPUs have no I/O points built in. In order to complete the PC we
need to mount one or more Units providing I/O points to the Backplane. Mount
the Units to the Backplane by pressing them firmly into position, making sure the
connectors are properly mated. Secure the Unit by tightening the mounting
screws located on the top and bottom of the Unit.
The following figure shows one I/O Unit mounted directly to the left of the CPU.
Units other than the Power Supply Unit, the CPU, and the I/O Control Unit (see
below) can be mounted to any of the other slots on the CPU Rack.
As you can see from the figure, there is still some space available to the left of the
I/O Unit. This space is for any additional Units that may be required.
The figure above shows a total of ten I/O Units mounted to the Backplane. These
I/O Units could be replaced by other Units, such as Special I/O Units, CPU Bus
Units, etc. I/O Units come in five shapes; A-, B-, C-, D- and E-shape (refer to Ap-
pendix B Specifications ) each of which can be mounted to any of the ten slots.
The Backplane, Power Supply Unit, CPU, and other Units are collectively called
a CPU Rack.
Mounting screws
Provided at the top and
bottom of the Unit.
Connector
Make sure the connectors
are properly mated.
I/O Unit
Section 3-1
41