NS15T-X01BV2 Omron, NS15T-X01BV2 Datasheet - Page 11

• Manufacturer Part Number: NS15T-X01BV2
• Description: TERMINAL PROGRAMMABLE 15"
• Manufacturer: Omron

Specifications of NS15T-X01BV2

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: NS15TX01BV2; Z3180

20
Single Port Multi Access (SPMA)
CX-Programmer
Ladder Monitor
Also meets the requirements of users who need to display devices onsite,
instead of the ladder program.
The ladder program and screen data can be transferred from a single port!
The ladder program can be transferred through the PLC and the PT's screen data can also be
transferred, all while the computer remains connected to the PT's port (such as a USB port).
The PT can transfer data over network levels by the following routes.
Computer (Serial/USB)
SPMA significantly improves maintenance efficiency when the NS-series PT and PLC are
some distance apart.
Computer (Serial)
Note: SPMA can be used in CS/CJ-series PLCs with lot number 030201 or later.
Note: SPMA via a PLC is not supported when a CP-series PLC is connected. (SPMA via an NS-series PT is supported with a CP-series PLC.)
The ladder program can be
monitored onsite without a laptop!
Ladder programs with I/O comments can
be monitored on the PT's screen and the
ladder program can also be edited with
the Programming Console function.
Note: The Ladder Monitor function is not supported by
Note: The ladder monitor function is not supported for
Best Match
[Switch Box Function]
The operator can check the PLC status by displaying just the I/O
comments and status.
[Device Monitor Function]
Displays the device's contents, allowing settings to be input and
checked and making startup operations more efficient.
Note: The machine monitor function, and switch box function are not supported when a CP1E PLC is connected.
the 5.7-inch models.
connection with a CP1E PLC. It is also not
supported by the CJ2M.
Note: USB connection is
CX-Designer
USB/Serial or Ethernet
USB or Ethernet
supported only for
CJ2 PLCs.
(See note.)
Keep connected.
PLC (Ethernet or Controller Link)
NS-series PT (Ethernet)
Ladder program
Keep connected.
Screen data
Screen data
Screen data
Serial connection
(1:N NT Link only)
Ethernet
Controller Link
NS
Ladder program
PLC
CS/CJ/CP-series PLC
Serial
Operation screen
PLC
NS
PLC (Ethernet or Controller Link)
The ladder program can be transferred.
NS-series PT
Ethernet or Controller Link
The ladder program can be transferred.
NS
Switch Box Function
PLC
Ethernet or Controller Link
PLC
Easy Support Tools
Easy Support Tools
PLC
Device Monitor Function
NS
Serial
Easy Access
NS
Standard Feature
Standard Feature
Standard Feature
PLC Data Trace
The PLC's operation can be checked!
The PLC Data Trace function is built into the PT in addition to the
Ladder Monitor and Device Monitor. A bit's status and operation
can be viewed in a time chart just by setting the desired PLC bit's
address in the PT. It is also now possible to display word data,
save data in CSV files, and save time chart screens in BMP files.
Note: There are differences between this Data Trace function and the
Note: The PLC data trace function cannot be used with the 5.7-inch model.
Note: The PLC data trace function is not supported for connection with a CP1E
PLC Troubleshooter
Constantly monitors PLC errors.
Automatically detects PLC errors and displays the error
details and recovery procedure on the screen. Even if a
problem occurs, it can be resolved quickly without referring
to the manuals.
Direct Connection to Temperature Controllers
Connect OMRON Temperature Controllers directly to
the NS-series PT.
OMRON Temperature Controllers can be connected directly to the
NS-series PT's RS-232C port. Data does not pass through the PLC, so
ladder programming is not required. Also, there are plenty of objects
in the SAP Library for Temperature Controllers, and Temperature
Controller screens can be created easily just by pasting objects from
the SAP Library to the screens.
Note: An RS-422A Serial Adapter is needed to connect directly to a
Temperature Controller. Refer to page 53 for a list of the Temperature Controllers
that can be connected. A Conversion Unit is not required to connect to the
RS-422A/485 serial interface of the NS15.
CX-Programmer's Data Trace function. Refer to the NS-series
Programmable Terminal Programming Manual (Cat. No. V073) for details.
PLC.
Error details are displayed.
CS/CJ/CP-series
PLC
Note: A special template is required when using this function.
Processing procedure is
displayed.
The screen template is supplied with CX-Designer of version 2.1 or
later. This function is a standard feature in the NSJ-series PTs.
CJ1W-CIF11
RS-422A Serial Adapter
Data Trace
OMRON Temperature Controllers
Easy Support Tools
Easy Support Tools
CS/CJ/CP-series PLC
Easy Access
Standard Feature
Standard Feature
21