9-520272-2 TE Connectivity, 9-520272-2 Datasheet - Page 5

• Manufacturer Part Number: 9-520272-2
• Description: Terminals 110 ULTRA-FAST RCPT 22-18 TPBR
• Manufacturer: TE Connectivity

Specifications of 9-520272-2

• Product: Fastons
• Wire Size (awg): 22-18
• Insulation: Insulated
• Color: Black
• Gender: Female
• Contact Plating: Tin
• Contact Material: Brass
• Termination Style: Crimp
• Insulation Material: Nylon
• Mounting Angle: Straight
• Mounting Method: Wire
• Number Of Positions / Contacts: 1
• Number Of Rows: 1
• Terminal Type: Receptacle
• Proprietary Name: Ultra-Fast
• Receptacle Style: Straight
• Mating Area Interface Dimensions (mm [in]): 2.79 x 0.81 [.110 x .032], 3.18 x 0.81 [.125 x .032]
• Insulation Diameter (mm [in]): 3.05 [.120] Max.
• Insulation Support: Non-Insulation Support
• Finish: Tin
• Wire Range (mm [awg]): 0.30-0.90² [22-18]
• Fully Insulated: Yes
• Ul Flammability Rating: UL 94V-2
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Strip
• Lead Free Status / Rohs Status: Details

4.
4.1.
4.2.
4.3.
Rev D
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
C.
Quality Conform ance Inspection
The applicable inspection plan will specify the sam pling acceptable quality level to be used. Dim ensional
and functional requirem ents shall be in accordance with the applicable product drawing and this
specification.
Certification
This product has been recognized under the Com ponent Recognition Program of Underwriters
Laboratories Inc., Electrical File Num ber E-66717 and certified by Canadian Standards Association File
Num bers LR-7189. Also, VDE Testing and Certification Institute, Reference No. 4751_1431_1047.
Sam ple Selection
Term inals and tabs shall be prepared in accordance with applicable Instruction Sheets and shall
be selected at random from current production. Test groups 1, 2, 3 and 4 shall each consist of 20
sam ples of each wire size and term inal type per group. Test groups 5, 6, 7, 8, 9, 10, 11 and 12
shall each consist of 20 sam ples of each term inal type per group. All sam ples to be term inated
shall be crim ped to appropriate tin plated test conductors.
Test Sequence
Qualification inspection shall be verified by testing sam ples as specified in Figure 3.
Acceptance
1.
2.
Metal Plate Test Fixture
Requirem ents put on the test sam ples, as indicated in the Requirem ents portion of Figure 1,
exist as either the upper or lower statistical tolerance lim it (95% confidence, 98% reliability).
All sam ples tested in accordance with this specification shall m eet the stated tolerance lim it.
Failures attributed to equipm ent, test setup or operator deficiencies shall not disqualify the
product. W hen product failure occurs, corrective action shall be taken and sam ples
resubm itted for qualification.
Figure 4
Tab, Receptacle Entry Position
Figure 5
108-2043
5 of 5