CB052E0474K-- AVX Corporation, CB052E0474K-- Datasheet - Page 6

• Manufacturer Part Number: CB052E0474K--
• Manufacturer: AVX Corporation

Specifications of CB052E0474K--

• Capacitance: .47uF
• Tolerance (+ Or -): 10%
• Voltage: 100VDC/63VAC
• Temp Coeff (dielectric): PLYETH
• Mounting Style: Surface Mount
• Package / Case: 2824
• Construction: SMT Chip
• Failure Rate: Not Required
• Seated Plane Height: Not Requiredmm
• Product Diameter (mm): Not Requiredmm
• Product Height (mm): 4.4mm
• Product Depth (mm): 6.1mm
• Product Length (mm): 7.2mm
• Lead Spacing (nom): Not Requiredmm
• Lead Diameter (nom): Not Requiredmm
• Operating Temp Range: -55C to 125C
• Lead Free Status / Rohs Status: Compliant

Film Chip Capacitors
PET-HT DIELECTRIC – CB Series
MOUNTING AND SOLDERING RECOMMENDATIONS
SOLDERING PROFILE
The capacitors can be mounted using infrared and vapor phase soldering following recommended below. They are NOT
suitable for wave soldering.
*Reflow soldering referring to JEDEC Standard with some limitations
*JEDEC J-Std 020C
RECOMMENDED SOLDER PASTE THICKNESS
For optimum solderability, the recommended soldering
paste thickness: 2220 to 2824 :150 to 200µm
RECOMMENDED CLEANING
To clean flux from the PC board assembly, the recommended
products are: ethanol, isopropyl alcohol, and deionized water
wash. The cleaning products to avoid are: Toluene, Xylene,
Trichloroethylene, Terpene Cleaner EC-7, surface active
agent. In case of using another solvent, please contact us.
TIN WHISKERS TESTS : JEDEC STANDARD NO 22A121
A
Ambient Temperature /
Preheating
Soldering
Temperature cycling
High Temperature /
Humidity Storage
Humidity Storage
Phase
Stress Type
except 400 & 630V 2220 to 6054
4030 to 6054 :200 to 300µm
2220 to 2824
4030 to 6054
C
JESD22-A104
Size
Ref. Spec.
All
B
PAD DIMENSIONS:
Size Code
T max= 245°C and 10 s between T max and Tmax-5°C
T max= 250°C and 10 s between T max and Tmax-5°C
T max= 240°C and 10 s between T max and Tmax-5°C
70+/-5°C - 93+3/-2% RH -1000H
30+/-2°C - 60+/-3% RH -2000H
to 10mn soak 3 cycles/hour
04
05
16
17
18
-55°C +85(+10/-0)°C air 5
Test Conditions
Temperature (°C)*
Case Size
160 to 180°C max
OTHER CAUTIONS
Flame retardancy: the dielectric film is not a flame retardant
material.
Environment: contact us when chips are used in humid or
gas atmosphere and /or when using resin.
Recommended handling: do not use edged tools, so not
to damage the capacitors.
In case of hand soldering, the temperature of the soldering
iron should not be above 250°C. Special care must be taken
to avoid touching the capacitor body with the iron tip.
2220
2824
4030
5040
6064
millimeters (inches)
5.00 (0.195)
6.00 (0.234)
7.50 (0.295)
11.2 (0.441)
14.6 (0.575)
A
SEM x 1000
SEM x 1000
SEM x 1000
Analysis
1.90 (0.075)
2.50 (0.098)
3.00 (0.118)
3.50 (0.137)
3.60 (0.147)
75s at temperature > 217°C
60s at temperature > 217°C
60s at temperature> 217°C
B
180s max.
Time (s)
Results
4.50 (0.178)
5.70 (0.224)
8.00 (0.315)
10.3 (0.406)
12.6 (0.496)
Pass
Pass
Pass
C
15