DSOX2012A-GSA AGILENT TECHNOLOGIES, DSOX2012A-GSA Datasheet - Page 16

• Manufacturer Part Number: DSOX2012A-GSA
• Description: OSCILLOSCOPE, 100MHZ, 2 ANLG, 2GSPS
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of DSOX2012A-GSA

• Scope Type: Digital Bench
• Scope Channels: 2 Analog
• Bandwidth: 100MHz
• Meter Display Type: WVGA Color
• Sampling Rate: 2GSPS
• Input Impedance: 1Mohm
• Input Voltage: 300V
• External Height: 8.05"
• Rohs Compliant: NA

Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Performance characterisitics
** 1 mV/div and 2 mV/div is a magnification of 4 mV/div setting. For vertical accuracy calculations, use full scale of 32 mV for
* Denotes warranted specifications, all others are typical.
Acquisition modes
Normal
Peak detect
Averaging
High resolution mode
Segmented
Trigger system
Trigger modes
Trigger coupling
Trigger source
Trigger sensitivity (internal)*
Trigger sensitivity (external)*
Cursors
Types
Measurements
Cursors**
Automatic waveforms measurements
Voltage
Time
Specifications are valid after a 30-minute warm-up period and from ±10 °C firmware calibration temperature.
2 mV/div sensitivity setting.
Amplitude, time , frequency (FFT), manual, tracking, binary, HEX
∆T, 1/∆T, ∆V/X, 1/∆X, ∆Y, Phase and Ratio
• Single cursor accuracy:
±[DC vertical gain accuracy + DC vertical offset accuracy + 0.25% full scale]
• Dual cursor accuracy:
±[DC vertical gain accuracy + 0.5% full scale]*
Snapshot all, maximum, minimum, peak-to-peak, top, base, amplitude, overshoot, preshoot, average- N
cycles, average-full screen, DC RMS- N cycles, DC RMS- full screen, AC RMS- N cycles
Period, frequency, rise time, fall time, + width, – width, duty cycle, delay A→B (rising edge), delay A→B
(falling edge), phase A→B (rising edge,) and phase A→B (falling edge)
Capture glitch as narrow as 500 ps at all timebase settings.
Select from 2,4,8,16, 64... to 65,536
12 bits of resolution when ≥ 20 µs/div
Re-arm time= 19 µs (minimum time between trigger events)
• Edge (rising/falling alternate, either)–Conventional level-driven trigger.
• Pulse width (or glitch)–Trigger on a pulse width less than, greater than, or
• Pattern-trigger on a logical AND combination of the channels. Each
• Video–Trigger on all lines or individual lines, odd/even or all fields from
Coupling selections: AC, DC, noise reject, LF reject and HF reject.
Each analog channel, each digital channel (MSO models or DSOX2MSO
upgrade, Ext, WaveGen, line)
< 10 mV/div: greater of 1 div or 5 mV; ≥ 10 mV/div: 0.6 div
200 mV (DC to 100 MHz); 350 mV (100 MHz - 200 MHz)
within a time range, with a selectable time limit ranging from 17 ns to 10 s.
channel can have a value of zero, one, don’t care (X), or a rising or falling
edge (one channel only).
composite video or broadcast standards (NTSC, PAL, PAL-M, SECAM).
16