2130C 3M, 2130C Datasheet - Page 2

• Manufacturer Part Number: 2130C
• Description: Chemicals SCOTCHCAST 21.7oz
• Manufacturer: 3M

Specifications of 2130C

• Product: Epoxy Compounds
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 00054007314028

3M™ Scotchcast™ Flame-Retardant Compound 2130
Typical Properties
Usage Information
Not for specifications. Values are typical, not to be considered minimum or maximum.
Properties measured at room temperature 73°F (23°C) unless otherwise stated.
IMPORTANT:
Product should remain in the sealed container/envelope until ready to use. In cold
weather, warm closed mixing pouch to 60°F (16°C) or warmer before mixing. Keep in a
warm area, such as truck cab or inside pocket, until ready to use.
Closed Mixing Pouch:
• Tear open the protective envelope and remove the closed mixing pouch
• Before breaking the barrier, squeeze the bag to premix the separate components.
• Firmly grasp each flat side of the bag near the center barrier, while pulling the sides of
• Alternately squeeze each end of the bag, forcing the resin back and forth (30 seconds).
• Strip the resin from the corners of the bag and continue to mix until the color is uniform
• Clip off a corner of the closed mixing pouch and pour
Bulk Components:
Measure the appropriate quantity of each component as indicated in the table below, then
thoroughly mix to a uniform color and consistency prior to use. Bulk components should
be blanketed with nitrogen to prevent moisture contamination.
the barrier apart and rolling the sides of thumbs through the barrier. Break the barrier
all the way across to the side seals.
(additional 30 seconds, maximum).
Physical Properties (Test Method)
Color
Hardness (ASTM D2240)
Density
Tensile Strength (ASTM D412)
Elongation (ASTM D412)
Glass Transition Temperature, T
Maximum Exotherm, 100g (3M Method TM-67)
Gel Time @ 75ºF (23ºC) (3M Method TM-67)
Moisture Absorption (ASTM D471)
Electrical Properties (Test Method)
Dielectric Strength (ASTM D149)
Dielectric Constant, @ 60Hz
(ASTM D150)
Dissipation Factor, @ 60Hz
(ASTM D150)
168 hrs. Immersion @ 212ºF (100ºC)
Component
Part A
Part B
2 of 3
Pale Yellow
Color
Black
g
(DMA)
Weight Ratio
(w/w)
2.1
1
Typical Value
US units (metric)
Black
83 Shore A
0.702 oz/in
1080 psi (75,9 kg/cm
377%
-112 ºF (-80ºC)
145ºF (62,9ºC) rise
17 minutes
2.84%
Typical Value
371 V/mil (14,6 kV/mm)
14.0% @194ºF (90ºC)
3.1% @ 73ºF (23ºC)
5.8% @140ºF (60ºC)
5.07 @ 73ºF (23ºC)
5.82 @140ºF (60ºC)
6.24 @194ºF (90ºC)
3
Volume Ratio
(1,215 g/cm
(v/v)
1.76
1
2
)
3
)