6564 Pomona Electronics, 6564 Datasheet - Page 2

• Manufacturer Part Number: 6564
• Description: Test Leads DO-IT-YOURSELF MIN
• Manufacturer: Pomona Electronics

Specifications of 6564

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1899160

1.
2.
3.
4.
5.
6.
*Color may vary outside of the USA.
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
7/10/02 SY/EH/LS
Last saved by Laura Goldberg
C:\Laura Goldberg\FlukeDataSheet \d6380_6562-63-64_2_02.doc
Using a flat tip screwdriver, remove lid from connector.
Cut back extension wire jacket (if applicable) 5/8”, strip back individual wires ¼”.
Remove the elastomer strain relief from the connector. Insert wires into the strain relief until flush with the extension
wire outer jacket (5/8”).
Loosen the two wire terminal screws (Approximately 3 ½ turns counter clockwise) using a small flat tip
screwdriver.
Insert the stripped Red* wire under the (-) terminal screw, and the remaining wire under the (+) terminal screw.
Tighten down the two terminal screws.
Install the lid and tighten down the lid screw.
Sales: 800-490-2361 Fax: [phone]
Technical Assistance: 800-241-2060
ASSEMBLY INSTRUCTIONS
PomonaACCESS 90747 [phone] or [phone]
More drawings available at www.pomonaelectronics.com
Model 6380, 6562, 6563, 6564
Female Mini-Connector
“Do-It-Yourself”
Page 2 of 2