MC68HC711KS2MFN4 Freescale Semiconductor, MC68HC711KS2MFN4 Datasheet - Page 163

• Manufacturer Part Number: MC68HC711KS2MFN4
• Description: 32K EPROM - SLOW MODE
• Manufacturer: Freescale Semiconductor

M68HC11K Family
MOTOROLA
TDRE — Transmit Data Register Empty Flag
TC — Transmit Complete Flag
RDRF — Receive Data Register Full Flag
IDLE — Idle Line Detected Flag
OR — Overrun Error Flag
NF — Noise Error Flag
TDRE is set when the SCDR transfers its contents to the transmission
shift register.
TC is set when the final character in a message has been sent (no
data, preamble, or break transmissions pending).
RDRF is set when the shift register has received a complete character
and transferred it to the receive data register.
IDLE is set when a frame of all 1s is received after a message.
OR is set if a new character is received before a previously received
character is read from SCDR.
NF is set after the last bit in a frame is received if the samples in the
receiver’s data recovery circuit are not unanimous for any of the bits,
including start and stop bits.
0 = SCDR is full.
1 = SCDR is empty.
0 = Transmitter busy
1 = Transmitter idle
0 = RDR not full
1 = RDR full
0 = RxD line is active.
1 = RxD line is idle.
0 = No overrun
1 = Overrun detected
0 = No noise detected
1 = Noise detected
Serial Communications Interface (SCI)
Serial Communications Interface (SCI)
Technical Data
SCI Registers
163