HBL430P7W Hubbell Wiring Device-Kellems, HBL430P7W Datasheet - Page 2

• Manufacturer Part Number: HBL430P7W
• Description: Plug; 30 A; 480 V; Red; Nylon; High-Impact Thermoset; Stainless Steel; 3000 VAC
• Manufacturer: Hubbell Wiring Device-Kellems
• Type: Cable Plugr

Specifications of HBL430P7W

• Agency Approvals: UL, CSA
• Amperage: 30 A
• Color: Red
• Contact Type: Pin
• Current, Rating: 30 A
• Diameter, Cord: 0.375 to 1.25
• Dielectric Rating: 3000 VAC
• Flammability, Standard: UL Listed, CSA Certified
• Ip Rating: IP67
• Material, Contact: Brass
• Material, Cord Clamp: Stainless Steel
• Material, Housing: Zytel 801 Nylon
• Material, Retainer Clip: High-Impact Thermoset
• Material, Terminal Screw: Stainless Steel
• Number Of Contacts: 4
• Number Of Poles: 3
• Special Features: Watertight
• Temperature, Operating, Maximum: +75 °C
• Temperature, Operating, Minimum: -40 °C
• Termination: Screw
• Voltage, Rating: 480 V
• Weight: 1.3 lbs.
• Wire, Awg: #12-#8
• Lead Free Status / Rohs Status: RoHS Compliant part

Contact Carrier
Retainer
Ground/Phase Pins
Terminal Screws
Assembly Screws
Gaskets
Cord Clamps
Grommet/Glands
Gland Cap
Cord Clamp Screws
Clamp Nut
Certification
Dielectric Withstand Voltage
Max Working Voltage
Current Interrupting
Temperature Rise
Endurance
Impact Resistance
Cord Grip Retention
Cord Accommodation
Terminal Identification
Product Identification
Moisture Resistance
Ingress Protection
Flammability
Operating Temperatures
CSA Certified File LR280C for Plugs, Connectors and Inlets, LR285C for Receptacles, CSA Standard C22.2 No. 182.1,
UL Classified to IEC60309-1, IEC
75%.
30A, 32A, 60A and 63A, and 250 cycles with load and 250 cycles w/o load for 100A and 125A.
C22.2 No. 49 and the harmonized European Standards.
High-Impact Thermoset
High-Impact Thermoset
Brass
Stainless Steel (300 series)
Stainless Steel (300 series)
Neoprene
Rynite SST35
Solid Neoprene
Rynite SST35
Stainless Steel (300 Series)
Nickel Plated Brass
UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors, UL Standard UL1682 & UL1686C2,
Withstands 3,000V AC
600V RMS (i.e.minimum creepage distance 10 mm minimum)
Certified for current interrupting at full rated current.
Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of
5,000 connect and disconnect cycles with load for 16A and 20A, 1,000 cycles with load and 1,000 cycles w/o load for
Per CSA C22.2 No. 182.1 / UL1682.
Per CSA C22.2 No. 182.1 / UL1682.
Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA
Terminals identified in accordance with North American and IEC conventions.
Identification and ratings are a permanent part of the device housing.
Watertight per IEC 60309-1
IP 67 Suitability
HB or Better per UL 94 or CSA C22.2 No. 0.17
Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact.