PYD1388 Excelitas Technologies Sensors, PYD1388 Datasheet - Page 4

• Manufacturer Part Number: PYD1388
• Description: Pyroelectric Infrared Detectors - Dual Element Detectors
• Manufacturer: Excelitas Technologies Sensors

Specifications of PYD1388

• Package Type: TO- 5 metal housing with infrared transparent window
• Temperature, Operating, Maximum: 85 °C
• Temperature, Operating, Minimum: –40 °C
• Voltage, Operating: 2 to 12 VDC
• Test Conditions: T = 22°C
• Responsivity: 100°C Black Body
• Noise: 0.4 to 10 Hz Bandwidth
• Application: Motion Sensing.
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

Configuration:
Housing:
Element size:
Connections:
Field of View
Operating temperature:
The electrical parameters may vary from specified values accordance with their temperature
dependence.
Storage temperature:
Microphonic noise:
Humidity:
Hermetic seal:
Quality:
Handling:
Solder conditions:
Detectortype : PYD 1388
Date of Issue: 25.08.03
Avoid storage under high humid environment.
PerkinElmer IR-detectors covered herein have passed qualification test for microphonic noise
in x-y-z axis, exciting frequencies from 5Hz to 2kHz.
The IR-detector shall not increase noise or decrease responsivity when exposed to 95% r.H. at
30° C. Operation below dew point might effect performance.
This IR-detector is sealed to pass a He-leakage test with maximum leak rate of 10
PerkinElmer is a QS 9000 certified manufacturer with established SPC and TQM. Detector
out-going inspections include the parameters Responsivity, Match, Offset, Noise, Gross leak
(Mil Std 883 method 1014C1) on 100%. Individual data are not stored, statistical details can be
disclosed on request.
Electrostatic charges may destroy the detector. We recommend to apply precautions
necessary for ESD devices to avoid damages. Do not apply physical force to detector leads.
Do not expose detector to aggressive detergents such as freon, trichlorethylene, etc.
Hand soldering and standard wave soldering process may be applied. Avoid heat exposure to
the top and the window of the detector. Reflow soldering is not recommended.
Fig.5: Field of View
TO- 5 metal housing with infrared transparent window
Refer to drawing: 2/71377
-40° C to +85° C
-40° C to +85° C
max: 30 µV rms /g
2 x 1, spacing 1 mm, see also drawing: 2/71377
Date of Rev.: 17.03.04
Partno.: 3921
-8
mbar
Page: 4
Of
.
l
.
s
:5
-1
.