MNU14-187DFIX 3M, MNU14-187DFIX Datasheet - Page 4

• Manufacturer Part Number: MNU14-187DFIX
• Description: Terminal; Butt Splice; Brass; 0.085"; TinPlated; Nylon; 16-14 AWG; Blue; 100/Bottle
• Manufacturer: 3M

Specifications of MNU14-187DFIX

• Angle: Straight
• Brand/series: Scotchlok™
• Color: Blue
• Contact Plating: Tin
• Diameter, Insulation: 0.145 "
• Gender: Female
• Insulation Type: Nylon
• Length, Overall: 0.81 "
• Material, Contact: Brass
• Package Quantity: 500⁄Case
• Primary Type: Quick Disconnect
• Special Features: Butted Seam, One Barrel
• Standards: UL Listed, CSA Certified
• Termination: Wire
• Width, Overall: 0.3 "
• Wire Size: 16-14 AWG
• Lead Free Status / Rohs Status: RoHS Compliant part

Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase.
3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be,
at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will
not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential
regardless of the legal theory asserted.
Specifications
Wire Size:
Barrel Seam:
Max. Current:
Terminal Material:
Terminal Plating:
Installation Information
UL Listed and CSA Certified for use on stranded copper
(AWG) wire only.
Strip away the end 3/8 inch of wire insulation.
Make the crimp in the proper station of a recommended
3M crimp tool: TH-440, TH-450 (scissor style), or
TR-490 (ratchet style) hand tools.
3M and Scotchlok are trademarks of 3M.
WARNING
Turn power off before installing or removing terminal. All electrical
work should be done according to appropriate electrical codes.
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.
Barrel Crimp (Electrical)
See Table Above
Butted
Same as Wire
ETP Copper
Tin
Engineering Specification
Crimp-type terminals shall, electrically and mechanically,
connect to a pre-stripped end of a stranded copper wire:
and have a flat tongue portion with a central opening for
mounting around a screw or stud.
The terminal line shall offer tongue variations in hole
(stud) size (6, 8 10, etc.) and configuration (ring, fork,
block fork, flanged block fork, locking fork, etc.): and
barrel variations in wire (AWG) size (22-18, 16-14,
12-10, etc.) and construction (non-insulated brazed seam,
vinyl insulated butted seam, nylon insulated with
insulation grip, etc.). The terminal line shall have
regulatory agency coverage (UL Listing, CSA
Certification). The terminal tongue shall be marked with
the wire range and manufacturer’s symbol ( ).
The non-insulated, butted seam ring tongue terminal shall
be tin-plated, annealed copper, with the tongue having a
specified stud hole (size 4 thru 5/16 in.) and a butted
seam barrel with a beveled I.D. for ease of stranded wire
entry, sized for a specified (AWG) wire range (22-18,
16-14, 12-10).
Non-insulated terminals shall be UL Listed and CSA
Certified.
© 3M 2002 78-8126-0524-0-A
Litho in USA.