TEP 100-4813-CMF TRACOPOWER, TEP 100-4813-CMF Datasheet - Page 3

• Manufacturer Part Number: TEP 100-4813-CMF
• Description: DC/DC CONVERTER; CHASSIS MOUNT; 100 WATT; INPUT 36-75VDC; 15VDC; 6.7A
• Manufacturer: TRACOPOWER
• Type: Industrialr

Specifications of TEP 100-4813-CMF

• Brand/series: TEP 100 Series
• Configuration: Enclosed
• Mounting Type: Panel
• Number Of Outputs: 1
• Operation: Switching
• Output: 15 V 6.7 A
• Primary Type: DC-DC
• Special Features: Wide 2:1 input voltage range; Full load operation up to 60°C withconvection cooling; Input protection filter
• Voltage, Input: 36-75 VDC
• Voltage, Output: 15 VDC
• Ultra Wide 2: 1 Input Voltage Range
• Lead Free Status / Rohs Status: RoHS Compliant part

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Output Specifications
Start up time (nominal Vin and constant resistive load)
Transient response (25% load step change)
Output current limitation
Over voltage protection
Short circuit protection
Capacitive load
General Specifications
Temperature ranges
Thermal impedance
Derating
Over temperature protection
Thermal shock
Humidity (non condensing)
Reliability, calculated MTTF (MIL-HDBK-217F, @ +25°C, ground benign)
Isolation voltage (60sec.)
Isolation capacity
Isolation resistance
Switching frequency
Safety standards
Safety approvals (pending)
Remote On/Off
Environmental compliance
Application notes
– Operating
– Case temperature
– Storage
– without Heatsink
– with Heatsink
– Input/Output
– Input/Case
– Input/Output
– Input/Output (500 VDC)
– positive logic (standard)
– negative logic (option -N)
– Off idle current:
– Reach
– RoHS
3.3 & 5 VDC models: 40‘000 µF max.
48 VDC models: 430 µF max.
15 VDC models: 4‘460 µF max.
24 VDC models: 1‘750 µF max.
28 VDC models: 1‘280 µF max.
12 VDC models: 7‘000 µF max.
– On: 3 to 12 VDC or open circuit
– Off: 0 to 1.2 VDC or short circuit pin 1 and 3
– On: 0 to 1.2 VDC or short circuit pin 1 and 3
– Off: 3 to 12 VDC or open circuit
25 ms typ. (at power On or remote On)
200 µs typ.
at 110 -140 % of Iout max.
at 115 -130 % of Vout nom.
indefinite, automatic recovery
–40°C to +75°C
+105°C max.
–55°C to +125°C
6.7°C/W
4.7°C/W
See derating graphs page 4
at 115°C
acc. MIL-STD-810F
95 % rel H max.
75‘000 h
2’250 VDC (basic insulation)
1’500 VDC
2500 pF max.
>1 GOhm min.
300 kHz typ. (puls width modulation)
UL 60950-1 , IEC/EN 60950-1
UL 60950-1, CB- test report
3 mA
www.tracopower.com/products/tep100-reach.pdf
RoHS directive 2002/95/EC
www.tracopower.com/products/tep100-application.pdf
DC/DC Converters
TEP 100 Series
100 Watt
Page 3 of 6