TP0008 NTE Electronics, Inc., TP0008 Datasheet

no-image

TP0008

Manufacturer Part Number
TP0008
Description
Theremo Pad; 0.50C/W Thermal Resistance; Silicon/Fibre Glass; Gray
Manufacturer
NTE Electronics, Inc.
Type
Interface Materialsr
Datasheet

Specifications of TP0008

Lead Free Status / Rohs Status
RoHS Compliant part
NTE's THERMO-PADS do away with the old
fashioned mica wafer and conductive grease
method of mounting power semiconductors.
These thermally conductive insulators offer
low heat transfer resistance while still provid‐
ing high electrical isolation between the parts
of the assembly. The elastomeric material
combines the electrical isolation of rigid insu‐
lators with the ability to conform to rough sur‐
faces and reduce contact resistance in much
the same manner as thermal greases. Proper
selection and use of these THERMO-PADS
results in a securely-mounted power semi‐
conductor and minimum resistance to the
heat transfer between it and the heat sink.
Note: NTE425 is a self-adhesive, thermal interface pad for
use in computer applications. For additional information, refer
to page 1-356.
1-366
THERMO PADS
$175
INSTALLED COST PER THOUSAND UNITS
150
125
100
75
50
25
LABOR
MATERIALS
THERMO-PAD
GREASE
MICA
PRE-GREASED
MICA
NTE Electronics, Inc.
TYPICAL PROPERTIES
PROPERTY
Construction
Color
Thickness
(Expressed in Inches)
Hardness, Shore A
Breaking Strength
Lbs./Inch
Elongation,
(%45°n to Warp and Fill)
Tensile Strength
(psi) / (MPa)
Continuous Use
Temperature (°C)
Dielectric Breakdown
Voltage (VAC)
Dielectric Constant
(1000 H
Volume Resistivity
(Ohm - Meter)
Flame Rating
Thermal Conductivity
Thermal Performance
(TO220 Test @ 50psi °C/W)
Thermal Impedance (Note 1)
(Test @ 50psi °C-in
Note 1. The ASTM D 5470 test fixture was used. The recorded
m-k
W
Z
value includes interfacial thermal resistance. These
values are provided for reference only. Actual applica‐
tion performance is directly related to the surface
roughness, flatness and pressure applied.
)
3
/W)
Silicone/Fiberglass
-60° to +180°
THICKNESS
0.009 INCH
0.009
4500
Gray
3000
10
V-O
6.61
1.45
5.5
0.9
85
30
54
± 0.001
11
ASTM D 2240
ASTM D 1458
ASTM D 149
ASTM D 150
ASTM D 257
ASTM D 412
ASTM D 412
METHOD
U.L. 94
Visual
TEST
-
-
-
-
-
-

Related parts for TP0008

TP0008 Summary of contents

Page 1

... Note 1. The ASTM D 5470 test fixture was used. The recorded value includes interfacial thermal resistance. These PRE-GREASED values are provided for reference only. Actual applica‐ MICA tion performance is directly related to the surface roughness, flatness and pressure applied. NTE Electronics, Inc. 0.009 INCH TEST THICKNESS METHOD Silicone/Fiberglass - ...

Page 2

... R TO218 Style TP0005 1.260 (32.0) .984 (25.0) .650 (16.51) .142 (3.6) Dia .205 (5.2) R TO3P Style TP0008 “W” “L” Precut Sheet TP0011 6” x 6” TP0012A 12” x 12” TP0013 2.25” x 1.75” .500 (12.7) .200 (5 ...

Related keywords