10074C Agilent Technologies Test Equipment, 10074C Datasheet - Page 5

• Manufacturer Part Number: 10074C
• Description: Probe; 1.5 m; 150 MHz; 10 Megohms; Approx 15 pF; lt 2.33 ns; 10:1
• Manufacturer: Agilent Technologies Test Equipment

Specifications of 10074C

• Attenuation: 10:1
• Bandwidth: 150 MHz
• Capacitance, Input: Approx 15 pF
• Length, Cable: 1.5 m
• Resistance, Input: 10 Megohms

High Frequency Active Differential Probe
Agilent 1130A InfiniiMax High-Performance Active Probe System
• 1.5 GHz InfiniiMax probe system
• InfiniiMax probe amplifier sup-
• Unrivaled InfiniiMax probing
• Compatible with 5000, 6000 and
The 1.5-GHz 1130A InfiniiMax
probe amplifier is a perfect com-
plement to the 6000 Series 1-GHz
models. Its 1.5-GHz bandwidth,
extremely low input capacitance
(0.32-pF), high common mode
rejection and the patented resis-
tor probe tip technology provide
ultra low loading of the DUT and
superior signal fidelity. Agilent’s
innovative InfiniiMax 1130A
differential probe is the easiest-
to-use, and highest performance
probing system available for high-
speed digital design, and repre-
sent a new industry standard for
accuracy, flexibility and reliability.
Designers can achieve 1-GHz sys-
tem bandwidth in conjunction
with 1-GHz 6000 and 7000 Series
oscilloscopes even when manu-
ally browsing with the probe or
making hands-off measurements.
Optional solder-in probe heads
and solder-in sockets as well as
browser configuration provide
full bandwidth at the probe tip.
ports both differential- and single-
ended measurements for a more
cost-effective solution
accessories support browsing,
solder-in, and socketed use mod-
els at the maximum performance
available
7000 Series oscilloscopes (except
for 6000 series 100 MHz models)
Specifications
Operating Characteristics
Probe Bandwidth (–3dB)
Rise and Fall Time (10% to 90%)
System Bandwidth (–3dB)
Input Capacitance
Input Resistance
Input Dynamic Range
Input Common Mode Range
Maximum Signal Slew Rate
DC Attenuation
Offset Range
Maximum Input Voltage
ESD Tolerance
Maximum Number of Probes
Supported by 5000/6000/7000 Series
you the highest performance available for measuring differential and single-
> 1.5 GHz
233 psec
1130A with MSO/DSO610xA, and MSO/DSO7104A: GHz
Cm = 0.1 pF Cm is between tips
Cg = 0.34 pF Cg is ground for each tip
Cdiff = 0.27 pF Differential mode capacitance = Cm + Cg/2
Cse = 0.44 pF Single-ended mode capacitance = Cm + Cg
Differential mode resistance = 50 kΩ ± 1%
Single-ended mode resistance = 25 kΩ ± 1%
±2.5 V
±6.75 V dc to 100 Hz; ±1.25 V > 100 Hz
18 V/ns when probing a single-ended signal
30 V/ns when probing a differential signal
10:1 ± 3% before calibration on oscilloscope
10:1 ± 1% after calibration on oscilloscope
± 12.0 V when probing single-ended
30 Vpeak, CAT I
>8 kV from 100 pF, 300 Ω HBM
2
Agilent 1130A InfiniiMax probe offers
5