D4NS-9AF Sti (Scientific Technologies, Inc.), D4NS-9AF Datasheet - Page 4

• Manufacturer Part Number: D4NS-9AF
• Description: SWITCH, SAFETY-DOOR, 1NC/1NO
• Manufacturer: Sti (Scientific Technologies, Inc.)
• Type: Interlockr

Specifications of D4NS-9AF

• Actuator Type: Key
• Contact Form: 1 NC/NO
• Current, Rating: 10 A
• Dielectric Strength: 300 V
• Function: Safety
• Ip Rating: IP67
• Mounting Hole Size: 2.15 mm
• Mounting Type: Door
• Number Of Poles: 1
• Termination: Screw
• Voltage, Rating: 240 VAC
• Lead Free Status / Rohs Status: RoHS Compliant part

The above values are initial values.
The Switch contacts can be used with either standard loads or microloads. Once the contacts have been used to switch a load, however,
they cannot be used to switch smaller loads. The contact surfaces will become rough once they have been used and contact reliability
for smaller loads may be reduced.
The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing properties are
sufficient for the operating conditions and environment beforehand. Although the switch box is protected from dust or water penetration,
do not use the D4NS in places where foreign material may enter through the key hole on the head, otherwise Switch damage or
malfunctioning may occur.
The durability is for an ambient temperature of 5 C to 35 C and an ambient humidity of 40% to 70%. For more details, consult your
OMRON representative.
If the ambient temperature is greater than 35 C, do not pass the 3-A, 250-VAC load through more than 2 circuits.
These figures are minimum requirements for safe operation.
This value will vary with the switching frequency, environment, and reliability level. Confirm that correct operation is possible with the
actual load beforehand.
IP67 (EN60947-5-1)
(This applies for the Switch only. The degree of protection for the key hole is IP00.)
1,000,000 operations min.
500,000 operations min. for a resistive load of 3 A at 250 VAC (See note 5.)
300,000 operations min. for a resistive load of 10 A at 250 VAC
0.05 to 0.5 m/s
30 operations/minute max.
60 N min.
10 mm min.
25 m
Resistive load of 1 mA at 5 VDC (N-level reference value)
300 V
Class II (double insulation)
3 (EN60947-5-1)
Between terminals of the same polarity
Between terminals of different polarities
Between other terminals and uncharged metallic parts
100 M
2 x 2 mm min
10 to 55 Hz, 0.75-mm single amplitude
1,000 m/s
300 m/s
100 A (EN60947-5-1)
10 A (EN60947-5-1)
Operating: 30 C to 70 C with no icing
Operating:95% max.
Approx. 96 g (D4NS-1CF)
max. (initial value)
2
min.
min.
2
min.
Safety-door Switch
2.5 kV
4 kV
6 kV
D4NS
AA-15