MRF24WB0MB/RM Microchip Technology Inc., MRF24WB0MB/RM Datasheet - Page 15

• Manufacturer Part Number: MRF24WB0MB/RM
• Description: 36 Module Varies Tray, WI-FI Transceiver Module with U.FL External Anntenna Connector
• Manufacturer: Microchip Technology Inc.

Specifications of MRF24WB0MB/RM

• Data Rate: 1 and 2 Mbps
• Small Size: 21mm x 31mm 36-pin Surface Mount Module
• Range: up to 400m (1300 ft.)
• Wi-fi® Certified (wfa Id: WFA7150)
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

2.3.4
The Standby state is not user-controlled but is noted as
it helps identify and track certain operations of the
module during power tracing.
TABLE 2-1:
FIGURE 2-3:
2.4
Joint Test Action Group (JTAG) is the common name
used for the IEEE 1149.1 standard entitled Standard
Test Access Port and Boundary-Scan Architecture for
test access ports that are used for testing printed circuit
boards using boundary scan. The MRF24WB0MA/
MRF24WB0MB supports JTAG boundary scan. The
JTAG port provides the optional hardware JTAG Reset
input, JTAG
driven high to enable JTAG mode. JTAG should not be
enabled during normal functional operation. This func-
tion affects power state current.
 2010 Microchip Technology Inc.
Hibernate
Standby
RX ON
TX ON
Sleep
State
Off
Note 1: See Section 2.2.
JTAG Interface
Hibernate
STANDBY STATE
RST
. JTAG_EN and JTAG
MRF24WB0MA/MRF24WB0MB POWER STATE DEFINITIONS
VDD
3.3V
3.3V
3.3V
3.3V
3.3V
MRF24WB0MA/MRF24WB0MB POWER-STATE DIAGRAM
0V
Note 1
Off
MRF24WB0MA/MRF24WB0MB
3.3V
RST
CS
0V
0V
0V
0V
0V
need to be
Standby
Note 1
Description
Power is completely disconnected
All internal power regulators are OFF – enabled by HIBERNATE pin
Enabled by TCPIP driver
Receive circuits are on and receiving
Transmit circuits are on and transmitting
State machine transition state only – not user controlled
2.5
The MRF24WB0MA/MRF24WB0MB incorporates a
Transmitted Data pin (DEBUG
pin (DEBUG
pins can be connected to commercially available RS-
232 line drivers/receivers with appropriate external
level shifters. The serial interface is fully tested at
115200 bits/seconds with RS-232/UART interface
applications.
RX On
200 us
Sleep
200 us
Debug Serial Interface
RX
) for serial debugging purposes. These
10 us
TX
) and a Received Data
TX On
DS70632A-page 15