EX-F71 Panasonic Electric Works, EX-F71 Datasheet - Page 3

• Manufacturer Part Number: EX-F71
• Description: Sensor, Leak Detection, Amp. Built In, SUS Mounting, 12-24V, NPN
• Manufacturer: Panasonic Electric Works
• Type: Levelr

Specifications of EX-F71

• Brand/series: EX-F70
• Current, Switching: 50 mA
• Function: Level
• Ip Rating: IP67
• Output: NPN
• Primary Type: Photoelectric
• Sensing Mode: Retro-Reflective
• Technology: Photoelectric
• Termination: Cable
• Voltage, Supply: 24 VDC
• Voltage, Switching: 30 VDC
• Lead Free Status / Rohs Status: RoHS Compliant part

EX-F70/F60
SPECIFICATIONS
Notes: 1) Highly viscous liquid may not be detected stably.
Notes:
Notes:
Notes:
Notes:
Item
Sensing object
Supply voltage
Current consumption
Output
Response time
FAULT indicator
NORMAL indicator
Pollution degree
Protection
Ambient temperature
Ambient humidity
Ambient illuminance
Emitting element
Material
Cable
Cable extension
Weight
Accessories
Utilization category
Output operation
Short-circuit protection
2) Fluorinert
3) The agents mentioned above are examples. For details, please contact our office.
4) Liquid being detected should also be kept within the rated ambient temperature range.
5) PVC mounting bracket may not be used depending on type or viscosity etc. of the agent. For details, please contact our office.
6) The mounting bracket for EX-F71
NPN output
PNP output
TM
is the world wide trademark of 3M.
Type
SUS mounting bracket type PVC mounting bracket type PFA mounting bracket type PVC mounting bracket type
<
NPN open-collector transistor
NPN output type
MS-EX-F7-1
(SUS mounting bracket)
(Note 6): 1 pc.
10 to
Maximum sink current: 50 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1.0 V or less (at 50 mA sink current)
0.1 mm
10 mA or less (PNP output type: 15 mA or less)
EX-F71-PN
EX-F71
60 C
2
3-core PVC cabtyre cable, 2 m
is not interchangeable with that of EX-F72
Water, Fluorinert
>
Red LED (Lights up when the leak liquid is detected, or the sensor is mounted improperly)
Enclosure: Polypropylene
14 to
General purpose
In normal state: ON, When leak detected or the sensor is mounted improperly: OFF
0.4 V or less (at 16 mA sink current)
Extension up to total 50 m
25 g approx.
140 F
MS-EX-F7-2, MS-EX-F7-3
(PVC mounting bracket)(Note 6):1 pc. each
for two-point-fixing and adhesive-fixing
TM
Green LED (Lights up when the sensor is mounted properly)
(Note 1, 2)
(No dew condensation or icing allowed) Storage:
Incandescent light: 1,000 ?x at the light-receiving face
12 to 24 V DC
EX-F72-PN
EX-F72
35 to 85 % RH, Storage: 35 to 85 % RH
6.562 ft
Infrared LED (non-modulated)
3 (Industrial environment)
164.042 ft
long
DC-12 or DC-13
10 % Ripple P-P 10 % or less
50 ms or less
Incorporated
IP67 (IEC)
is possible with 0.3 mm
due to the different sensitivity settings of each sensor.
<
PNP open-collector transistor
MS-EX-F6-1
(PFA mounting bracket): 1 pc.
PNP output type
Maximum source current: 50 mA
Applied voltage: 30 V DC or less (between output and
Residual voltage: 1.0 V or less (at 50 mA source current)
0.1 mm
Agent, such as Sulfuric acid, Hydrochloric acid,
Phosphoric acid or Ammonia etc. (Note 1, 3, 5)
EX-F61-PN
EX-F61
2
3-core PFA cabtyre cable, 3 m
>
Chemical-resistant
2
, or more, cable.
0.4 V or less (at 16 mA source current)
20 to
Enclosure: PFA
15 mA or less
60 g approx.
70 C
MS-EX-F6-2
(PVC mounting bracket): 1 pc.
4 to
EX-F62-PN
EX-F62
9.843 ft
158 F
(Note 4)
long
V)