10070C Agilent Technologies Test Equipment, 10070C Datasheet - Page 14

• Manufacturer Part Number: 10070C
• Description: Probe; 1.5 m; 20 MHz; 1 Megohms; 70 pF; lt 17.5 ns
• Manufacturer: Agilent Technologies Test Equipment

Specifications of 10070C

• Bandwidth: 20 MHz
• Capacitance, Input: 70 pF
• Length, Cable: 1.5 m
• Resistance, Input: 1 Megohms

Wedge Probe Adapters
• Easy connection to surface
• Safe, with no chance of shorting
• Mechanically non-invasive contact
• 3-, 8-, and 16-signal versions
• Supports 0.5 mm and 0.65-mm
Problem-free probing
The Agilent Wedge Probe Adapter
eliminates many of the frustra-
tions associated with probing
surface mount components. If
you’ve ever accidentally shorted
IC pins together, experienced
electrical and/or mechanical
problems with soldering small
wires onto leads, or gotten frus-
trated juggling multiple probes
while you’re trying to oper-
ate your scope, the Wedge was
designed with you in mind.
Make the inaccessible accessible
When you use the Wedge, you
don’t have to worry about short-
ing IC pins together on a delicate
component — or worse yet on
an irreplaceable prototype. The
Wedge is easy to insert and it
stays put. There’s no need to
solder small wires onto leads.
The Wedge is mechanically non-
invasive, so you won’t damage the
legs of the IC. Instead, you’ll have
easy access to hard-to-reach
components.
Electrical reliability
The Wedge makes two contact
points with each leg of the IC.
This redundant physical connec-
tion increases the electrical
reliability of the connection. And
the Wedge’s low capacitance and
inductance provides superior
performance to many other
alternatives.
14
mount ICs
TQFP and PQFP packages
IC clip kits
An inexpensive solution for prob-
ing fine-pitch ICs, the 10072A
SMT Kit includes ten IC clips and
two dual-lead adapters that con-
nect the clips directly to 10070-
family probes.
The 10075A 0.5-mm IC clip kit is
ideal for connecting to IC’s as fine
as 0.5-mm. The clip body allows
many clips to be mounted side-
by-side. The kit includes four
0.5-mm IC clips and two dual-lead
adapters that connect the IC clips
directly to 10070-family probes.
Agilent Wedge electrical
characteristics
Operating Voltage
Operating Current
Capacitance
Between Contacts
Self-Inductance
Cross Coupling
Contact Resistance < 0.1 Ω
< 40 V dc + peak ac
0.5 A maximum
2 pF typical (all except
Agilent-E2643A/44A)
4.33 pF typical at 1-MHz
(Agilent-E2643A/44A)
Agilent-E2643A/44A)
37 nH typical at 1-MHz
(Agilent E2642A/44A)
–31 dB typical at 100-MHz
(Agilent-E2643A/44A)
15 nH typical (all except
Ordering information
E2613A
E2613B
E2614A
E2643A
E2615A
E2615B
E2616A
E2644A
10072A
10075A
0.5 mm Wedge probe
adapter 3-signal, qty 1
0.5 mm Wedge probe
adapter, 3-signal, qty 2
0.5 mm Wedge probe
adapter, 8-signal, qty 1
0.5 mm Wedge probe
adapter, 16-signal, qty 1
0.65 mm Wedge probe
adapter, 3-signal, qty 1
0.65 mm Wedge probe
adapter, 3-signal, qty 2
0.65 mm Wedge probe
adapter, 8-signal, qty 1
0.65 mm Wedge probe
adapter, 16-signal, qty 1
SMT kit for 10070 probe
family
0.5 mm IC clip kit