PCMZPM Bogen Communications, Inc., PCMZPM Datasheet - Page 4

• Manufacturer Part Number: PCMZPM
• Description: Module, Zone Paging; 3; 70 V; PCM Series
• Manufacturer: Bogen Communications, Inc.

Specifications of PCMZPM

• Brand/series: PCM Series
• Number Of Stations: 3
• Voltage, Operating: 70 V

PCMZPM
Description
The Bogen PCMZPM module provides three zones of paging to the PCM2000
system. Up to three PCMZPM modules can be used in a basic system to pro-
vide up to nine zones of paging. Additional modules can be combined with a
PCMCPU module in a satellite system when more than nine zones are required.
Each PCMZPM module lets you set the talkback option (on or off) and back-
ground music options for each zone. Each zone can be connected or discon-
nected from the background music bus. Furthermore, the entire module can be
disconnected from the bus and a local background music source substituted.
Each module can also be configured for high-power operation (when using pas-
sive speakers and a central amplifier), or low-power operation (supplying low
level signals to amplified speakers). A relay driver is provided for each zone,
becoming active when the zone is active.
Talkback Option
The talkback option requires the use of the PCMTBM talkback module (one per
system).
Talkback for each zone is selected using the built-in DIP switches. For each zone,
place the corresponding DIP switch in the OFF position for no talkback, or in
the ON position if talkback is desired.
Set Output Type
The OUTPUT switch is used to set the module for low-power or high-power
operation.A mechanical switch lock is provided to secure the switch in place.To
change the switch position, remove the screw securing the lock. Change the
switch position, then invert the lock and secure it in place with the screw.
Place the OUTPUT slide switch in the LO PWR position when using amplified
speakers or amplifiers per zone. Internal buffer amps condition the low level sig-
nal to drive approximately 50 amplified speakers. Place the switch in the HI PWR
position when using passive speakers with a central amplifier. Only one output
type can be selected per PCMZPM module.
BGM Volume
The BGM VOL control changes the volume of the low level background music.
Low level page volume is not effected by this control.
4