MY4ZN-D2-DC24(S) Omron Automation, MY4ZN-D2-DC24(S) Datasheet - Page 18
![no-image](/images/no-image-200.jpg)
MY4ZN-D2-DC24(S)
Manufacturer Part Number
MY4ZN-D2-DC24(S)
Description
RELAY; GENERAL PURPOSE; 4PDT (BIFURICATED); BUILT-IN DIODE; 3A; 24VDC
Manufacturer
Omron Automation
Datasheet
1.MY4-DC24S.pdf
(20 pages)
Specifications of MY4ZN-D2-DC24(S)
Contact Form
4PDT
Current, Rating
3 A
Dielectric Rating
2000 VAC
Function
Power
Mounting Type
Socket
Power, Rating
1250⁄150 VA⁄W
Relay Type
Electro Mechanical
Resistance, Coil
636 Ohms
Standards
UL, CSA, VDE, LR, SEV, RoHS
Temperature, Operating, Maximum
70 °C
Temperature, Operating, Minimum
-55 °C
Termination
Plug-In
Voltage, Control
24 VDC
Voltage, Rating
250 VAC
Lead Free Status / Rohs Status
RoHS Compliant part
■ Precautions
Precautions for Connection
• Do not move the screwdriver up, down, or from side to side while it
• Do not insert the screwdriver at an angle. Doing so may break the
• Do not insert two or more wires in the hole. Wires may come in con-
• Insert the screwdriver along the hole wall as shown below.
• If lubricating liquid, such as oil, is present on the tip of screwdriver,
• Insert the screwdriver into the bottom of the hole. It may not be pos-
276
is inserted in the hole. Doing so may cause damage to internal
components (e.g., deformation of the coil spring or cracks in the
housing) or cause deterioration of insulation.
side of socket and result in a short-circuit.
tact with the spring causing a temperature rise or be subject to
sparks. (There are two wiring holes for each terminal.)
the screwdriver may fall out resulting in injury to the operator.
sible to connect cables properly if the screwdriver is inserted incor-
rectly.
General-purpose Relay
Screwdriver
MY
General Precautions
• Use the clip to prevent relays floating or falling out of the socket.
• Do not use the product if it has been dropped on the ground. Drop-
• Confirm that the socket is securely attached to the mounting track
• Ensure that the socket is not charged during wiring and mainte-
• Do not pour water or cleansing agents on the product. Doing so
• Do not use the socket in locations subject to solvents or alkaline
• Do not use the socket in locations subject to ultraviolet light (e.g.,
• Do not dispose of the product in fire.
Removing from Mounting Rail
To remove the socket from the mounting rail, insert the tip of screw-
driver in the fixture rail, and move it in the direction shown below.
ping the product may adversely affect performance.
before wiring. If the socket is mounted insecurely it may fall and
injure the operator.
nance. Not doing so may result in electric shock.
may result in electric shock.
chemicals.
direct sunlight). Doing so may result in markings fading, rust, corro-
sion, or resin deterioration.
Screwdriver
Fixture rail