927 1"X60 YDS 3M, 927 1"X60 YDS Datasheet - Page 3

• Manufacturer Part Number: 927 1"X60 YDS
• Description: Tape; Adhesive Transfer; 60 yd. (Length), 1 in. (Max.) Width
• Manufacturer: 3M

Specifications of 927 1"X60 YDS

• Size: 60 yd. (Length), 1 in. (Max.) Width
• Tape Type: Adhesive Transfer

Adhesive Transfer Tapes with Adhesive 300
927 • 950 • 950EK
Application Techniques
General Information
Application Ideas
Application Equipment
• The resistance of these tapes to ultra violet (U.V.) light is fair. Applications where
• 3M™ Adhesive 300 has relatively good resistance to moderate amounts of
• Adhesive 300 will not bleed into most paper stocks which helps minimize possible
• 3M™ tapes 927 and 950 meet the requirements of U.S. Government Specification
• Bond strength is dependent upon the amount of adhesive-to-surface contact
• To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well
• Ideal tape application temperature range is 70°F to 100°F (21° to 38°C). Initial tape
3M™ tapes 927, 950 and 950EK are ideal for attaching a wide variety of similar and
dissimilar materials where an aggressive adhesive with high initial adhesion is desired.
Some applications ideas are:
• Splicing of film, foils, fabrics.
• Laminating adhesive for foams, photos, fabrics, metal or plastic nameplates.
• General purpose holding and mounting applications.
To apply adhesives in a wide web format, lamination equipment is required to
ensure acceptable quality. To learn more about working with pressure-sensitive
adhesives please refer to technical bulletin, Lamination Techniques for Converters
of Laminating Adhesives (70-0704-1430-8).
For additional dispenser information, contact your local 3M sales representative, or
the toll free 3M sales assistance number at 1-800-362-3550.
the adhesive mass is directly exposed to sunlight or other sources of U.V. light
through glass, clear plastic, etc. should be avoided. Edge exposure is generally
satisfactory.
plasticizers. Applications may be subjectively evaluated by the user testing the tape
in contact with the materials at conditions of 150°F (66°C) for a period of 5-7 days.
discoloration of posters, business forms.
MIL-P-19834B, Amend 1.
developed. Firm application pressure helps develop better adhesive contact and
improve bond strength.
unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane.
Note: Be sure to follow solvent manufacturer’s precautions and directions for use
when using solvents.
application to surfaces at temperatures below 50°F (10°C) is not recommended
because the adhesive becomes too firm to adhere readily. However, once properly
applied, low temperature holding is satisfactory.
- 3 -