EL-USB-1-PRO Lascar Electronics, EL-USB-1-PRO Datasheet - Page 2

• Manufacturer Part Number: EL-USB-1-PRO
• Description: Data Logger; Metal, Hi-Low Temp, USB, for hostile environments
• Manufacturer: Lascar Electronics
• Type: Loggerr

EL-USB-1-PRO
LED FLASHING INDICATORS
The EL-USB-1-PRO features two high intensity LEDs, located in the main body of the logger. During operation, the LEDs flash to
indicate the logger and alarm status, as per below:
Specifications liable to change without prior warning
DIMENSIONS
BATTERY REPLACEMENT
We recommend that you replace the battery every 18 months, or prior to logging critical data.
The EL-USB-1-PRO does not lose its stored readings when the battery is discharged or when the battery is replaced; the data
logging process will however be stopped and cannot be re-started until the battery has been replaced and the logged data has
been downloaded to PC.
Only use an EL-USB-1-PRO battery back supplied by Lascar, which is rated for use in high temperatures and has the correct
battery terminals. Using non-Lascar batteries may result in fire or explosion at high temperatures.
Note:
Leaving the EL-USB-1-PRO plugged into the USB port for longer than necessary will cause some of the battery capacity to be
lost.
(Single Flash every 10 seconds)
(Double flash every 10 seconds)
(Triple flash every 10 seconds)
(Single Flash every 10 seconds)
(Double flash every 10 seconds)
(Triple flash every 10 seconds)
(Single Flash every 30 seconds)
All Dimensions in mm
www.lascarelectronics.com
Logging, no alarm
Delayed start
Logger full, no alarm
Logging, low alarm
Logging, high alarm
Logger full, alarm
Low battery
EL-USB-1-PRO
Issue Beta 3
Extended Temperature Range Data Logger
09/2008
N.J-H
Applies to EL-USB-1-PRO
Page 2 of 2