HBS2KCB4SJ055C C&K / ITT / Cannon, HBS2KCB4SJ055C Datasheet - Page 8

• Manufacturer Part Number: HBS2KCB4SJ055C
• Description: Switch, PRECISION, LARGE PLUNGER Actuator, SCREW TerminalS
• Manufacturer: C&K / ITT / Cannon
• Type: Basicr

Specifications of HBS2KCB4SJ055C

• Actuator Type: Plunger
• Brand/series: HB Series
• Contact Form: SPDT
• Current, Rating: 20/0.5 AAC/ADC
• Dielectric Strength: 1500 V
• Force, Operating: 13 Oz.
• Ip Rating: IP65
• Mounting Type: Panel
• Number Of Poles: 1
• Number Of Positions: 2
• Operation: Snap Action
• Special Features: High Overtravel
• Standards: UL Listed, CSA Certified, VDE Approved
• Temperature Rating: -55 to +105 °C
• Termination: Screw
• Voltage, Rating: 480/250 VAC/VDC

J
C&K HB Series
Single Pole Standard Precision Snap-acting Switches
Basic precision HB Series switches, with any terminal style, can be used with these attachable actuators. As supplied, the
actuator is not assembled to the switch; the switch must be ordered separately. The actuator can be assembled to the switch
before mounting, or the actuator can be mounted on the panel or chassis and the switch installed after wiring. Assembly
screws, nuts and lockwashers are furnished.
Actuator assembly sealed to mounting sur-
face by flexible boot and o-ring seal.
Provides up to .250 in. total travel; mounting
by threaded bushing or two screws.
BB-1
BJ-1
SEALED PLUNGER (For use with P0 actuator option.)
OVERTRAVEL PLUNGER (For use with P0 actuator option.)
AVAILABLE HARDWARE
J-30
Dimensions are shown: IN (mm)
Dimensions subject to change
www.ittcannon.com
Third Angle
Projection