ES1664T Chemtronics, ES1664T Datasheet - Page 3

• Manufacturer Part Number: ES1664T
• Description: Static Free, 16fl Oz Trigger
• Manufacturer: Chemtronics

Specifications of ES1664T

• Boiling Point: 212 °F (Approx.)
• Chemical Component: Deionized Water/Dipropylene Glycol Methyl Ether/Nonylphenoxypolyethoxy Ethanol/Propylene Glycol Methyl Ether/Propylene Glycol n-Butyl Ether/Quaternary Ammonium Compound
• Density, Vapor: > 1 (Air == 1)
• Dispensing Method: Bottle
• Flash Point: None to Boiling (TCC)
• Odor: Pleasant, Clean
• Ph: 5.5 to 6.5
• Physical State: Clear, Colorless Liquid
• Pressure, Vapor: 18 mm Hg @ 68°F
• Primary Type: Cleaner
• Special Features: Anti-Static
• Specific Gravity: 0.997 (Water == 1)
• Viscosity: 1 (Approx.) (Water == 1)
• Weight: 16 fl.oz.
• Lead Free Status / Rohs Status: RoHS Compliant part

ITW CHEMTRONICS
SECTION 1: CHEMICAL PRODUCT AND COMPANY INFORMATION
Product Identification
Product Code: ES1664T
SECTION 2: COMPOSITION, INFORMATION ON INGREDIENTS
Product Ingredient Information
Deionized water
Propylene Glycol Methyl Ether
Dipropylene Glycol Methyl Ether
Nonylphenoxypolyethoxy ethanol
Propylene glycol n-butyl ether
Quaternary ammonium compound
SECTION 3: HAZARD IDENTIFICATION
Emergency Overview: Clear, colorless liquid with pleasant clean odor. Liquid will irritate eyes and skin under repeated or prolonged exposure. Breathing high
concentrations of product vapor may produce drowsiness and a headache. This product is not flammable.
Potential Health Effects:
Eyes:
Skin:
Ingestion: Harmful if swallowed. Irritating to mouth, throat and stomach. May cause vomiting.
Inhalation: No hazard in normal industrial use. Vapors or atomized particles may be irritating to eyes and respiratory tract.
Pre-Existing Medical Conditions Aggravated by Exposure: Skin and eye.
SECTION 4: FIRST AID MEASURES
Eyes:
and tested by medical personnel if irritation develops or persists.
Skin: Wash skin with soap and water. Remove contaminated clothing. Get medical attention if irritation develops or persist. Wash clothing separately before reuse.
Ingestion: Swallowing less than an ounce will not cause significant harm. For larger amounts, do not induce vomiting, but give one or two glasses of water to drink and
get immediate medical attention.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
SECTION 5: FIRE FIGHTING MEASURES
Flash Point: None to boiling (TCC)
Extinguishing media: Use alcohol foam, carbon dioxide, or water spray when fighting fires involving this material.
Fire Fighting Instructions: As in any fire, wear self-contained breathing apparatus (pressure-demand, MSHA/NIOSH approved or equivalent) and full protective gear.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Large Spills: Shut off leak if possible and safe to do so. Wear appropriate personal protective equipment. Absorb spill with inert material (e.g. dry sand or earth), then
place in a chemical waste container for proper disposal. Do not flush to sewer. Avoid runoff into storm sewers and ditches which lead to waterways.
Small Spills: Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container for proper disposal.
SECTION 7: HANDLING AND STORAGE
Avoid prolonged or repeated contact with eyes, skin, and clothing. Wash hands before eating. Use with adequate ventilation. Avoid breathing product vapor or mist.
Do not reuse this container. Store in a cool dry place away from heat, sparks and flame. Keep container closed when not in use. Do not store in direct sunlight.
KEEP OUT OF REACH OF CHILDREN.
SECTION 8: EXPOSURE CONTROLS, PERSONAL PROTECTION
Exposure Guidelines:
CHEMICAL NAME
Nonylphenoxypolyethoxy ethanol
Dipropylene Glycol Methyl Ether
Propylene Glycol Methyl Ether
Propylene glycol n-butyl ether
Work/Hygienic Practices: Good general ventilation should be sufficient to control airborne levels. Local exhaust ventilation may be necessary to control any air
contaminants to within their TLVs during the use of this product. If vapor concentration exceeds TLV, use NIOSH approved organic vapor cartridge respirator.
Wear safety glasses with side shields (or goggles) and rubber or other chemically resistant gloves when handling this material.
NFPA and HMIS Codes:
Health
Flammability
Reactivity
Personal Protection
Liquid and vapors of this product are irritating.
Contact may cause skin irritation.
Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Have eyes examined
Product Information: 800-TECH-401
®
STATIC FREE™ MAT & BENCHTOP RECONDITIONER (Liquid)
LEL/UEL: Not established (% by volume in air)
(Formerly Static Free SD-22)
ACGIH TLV
NA
100 ppm
100 ppm
NA
34590-94-8
68308-67-8
Page 1 of 2
CAS#
NFPA
7732-18-5
9016-45-9
5131-66-8
107-98-2
1
0
0
-
OSHA PEL
NA
NA
NA
100 ppm
Wt. % Range
HMIS
1
0
0
B
90.0-95.0
0.1–2.0
0.1-5.0
1.0-5.0
0.1-1.0
0.5-1.5
ACGIH STEL
NA
150 ppm
150 ppm
NA
MSDS # 2003L