EL-USB-1 Lascar Electronics, EL-USB-1 Datasheet - Page 3

• Manufacturer Part Number: EL-USB-1
• Description: Data Logger, Temperature, w/Direct USB Interface
• Manufacturer: Lascar Electronics
• Type: Loggerr

Specifications of EL-USB-1

• Sample Rate: Every 10 Second to Every 12 Hours
• Temperature Accuracy: ±1 (–2) °C (°F)
• Temperature, Range, Measuring: –35 (–31) to 80 (176) °C (°F)
• Lead Free Status / Rohs Status: RoHS Compliant part

EL-USB-1
Specifications liable to change without prior warning
DIMENSIONS
BATTERY REPLACEMENT
Note:
Leaving the EL-USB-1 plugged into the USB port for longer than necessary will cause some of the battery capacity to be lost.
We recommend that you replace the battery every 12 months, or prior to logging critical data.
The EL-USB-1 does not lose its stored readings when the battery is flat or when the battery is replaced; the data
logging process will however be stopped and cannot be re-started until the battery has been replaced and the
logged data has been downloaded to PC.
Only use Sonnenschein (SL-750/S) or Tekcell (SB-AA02) 3.6V 1/2AA lithium batteries. Check with your supplier
that the battery you are ordering is 'press fit' and is not fitted with solder tags. Before replacing the battery, remove
the EL-USB-1 from the PC.
WARNING: Handle lithium batteries carefully, observe warnings on battery casing.
All dimensions in mm (inches)
Dispose of in accordance with local regulations.
98.0 (3.86)
Internal Temperature Sensor Location
www.lascarelectronics.com
Temperature Data Logger with USB Interface
EL-USB-1
Issue 7
04/2007
P.P.
No: 0754 - Page 3 of 3
Applies to EL-USB-1/3