VAA1005 Cosel U.S.A. Inc., VAA1005 Datasheet - Page 2

• Manufacturer Part Number: VAA1005
• Description: Power Supply, Switching; 10 W (Max.); 85 to 132 VAC (1 Phase)/110 to 170 VDC
• Manufacturer: Cosel U.S.A. Inc.
• Type: Commercialr

Specifications of VAA1005

• Brand/series: VAA Series
• Configuration: Open-Frame
• Current, Input: 0.3 A (Typ.)
• Current, Output: 2 A
• Dimensions: 32 mm W x 18 mm H x 72.5 mm D
• Frequency, Operating: 47 to 440 Hz
• Line Regulation: 20 mV (Max.)
• Load Regulation: 40 mV (Max.)
• Mounting Type: PCB
• Number Of Outputs: 1
• Operation: Switching
• Output: 5 VDC @ 2 A
• Power, Output: 10 W
• Power, Rating: 10 W (Max.)
• Primary Type: AC-DC
• Temperature, Operating: -10 to 70°C
• Voltage, Input: 85 to 132/110 to 170 VAC/VDC
• Voltage, Output: 5 VDC
• Standard Output Voltages: 5 and 12 VDC
• Standard Input: AC 85~132
• Conductive Noise: FCC-B, VCCI-B with Additional Capacitors
• Lead Free Status / Rohs Status: RoHS Compliant part

VAA
INPUT
OUTPUT
PROTECTION
CIRCUIT
ISOLATION
ENVIRONMENT
SAFETY AND
NOISE
REGULATIONS
OTHERS
SPECIFICATIONS
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
*1
*2
*3
G-158
Rated input/output Ta=25C
This is the value that measured on measuring board with capacitor of 22mF. Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN: RM101).
Drift is the charge in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.
R
MODEL
VOLTAGE[V]
CURRENT[A]
EFFICIENCY[%]
FREQUENCY[Hz]
INRUSH CURRENT[A]
LEAKAGE CURRENT[mA] 0.5max ( 60Hz According to UL and DEN-AN )
VOLTAGE[V]
CURRENT[A]
LINE REGULATION[mV]
LOAD REGULATION[mV] 40max
RIPPLE[mVp-p]
RIPPLE NOISE[mVp-p]
TEMPERATURE COEFFICIENT[mV] -10 to +55 C 50max
DRIFT[mV]
OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed
START-UP TIME[ms]
HOLD-UP TIME[ms]
OUTPUT VOLTAGE SETTING[V]
OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically
OVERVOLTAGE PROTECTION Works over 115% of rating ( by zener diode clamping )
INPUT-OUTPUT
INPUT-FG
OUTPUT-FG
OPERATING TEMP. , HUMID.AND ALTITUDE -10 to +70 C , 20 - 90%RH ( Non condensing ) ( Refer to DERATING CURVE ), 3 , 000m ( 10 , 000feet ) max
STORAGE TEMP. , HUMID.AND ALTITUDE -20 to +75 C , 20 - 90%RH ( Non condensing ), 9 , 000m ( 30 , 000feet ) max
VIBRATION
IMPACT
AGENCY APPROVALS
CONDUCTED NOISE
CASE SIZE/WEIGHT
COOLING METHOD
On-board type
VAA10
0 to +55 C
-10 - 0 C
0 to +55 C
-10 - 0 C
VOLTAGE[V] 5
CURRENT[A] 2.0
* 1
* 1
* 1
* 2
* 2
* 2
* 2
* 3
* 1
VAA1005
10.0
VAA1005
AC85 - 132 1 f or DC110 - 170
0.3typ ( ACIN 100V , Io=100% )
76typ
47 - 440 or DC
15typ ( ACIN 100V , Io=100% )
5
2.0
20max
80max
140max
120max
160max
20max
200max ( ACIN 85V , Io=100% )
10typ ( ACIN 85V , Io=100% ), 20typ ( ACIN 100V , Io=100% )
4.90 - 5.30
AC2 , 000V 1minute , Cutoff current = 10mA , DC500V 50M W min ( At Room Temperature )
AC2 , 000V 1minute , Cutoff current = 10mA , DC500V 50M W min ( At Room Temperature )
AC500V 1minute , Cutoff current = 100mA , DC500V 50M W min ( At Room Temperature )
19.6m/s
196.1m/s
UL60950-1 , C-UL Complies with DEN-AN ( External Fuse is required )
Complies with FCC-B , additional capacitors required for meeting VCCI class B
32 X 18 X 72.5mm ( W X H X D ) / 35g max
Convection
2
2
10 - 55Hz , 3minutes period , 60minutes each along X , Y and Z axis ( Non operating )
11ms , once each X , Y and Z axis ( Non operating )
1
VAA
Ordering information
2
10
VAA1012
10.8
12
0.9
VAA1012
77typ
12
0.9
48max
100max
120max
160max
150max
180max
120max
48max
11.40 - 12.60
3
05
1Series name
2Output wattage
3Output voltage