EE-SPY301 Omron Automation, EE-SPY301 Datasheet - Page 3

• Manufacturer Part Number: EE-SPY301
• Description: Sensor; Dark-ON; Diffuse Mode Sensing Mode; Photoelectric; 5 mm; Red LED
• Manufacturer: Omron Automation
• Type: Diffuser

Specifications of EE-SPY301

• Current, Switching: 80 mA
• Dimensions: 1.02 in. Overall L x 0.28 in. W x 0.79 in. H
• Function: Vane
• Indicator: Red LED
• Ip Rating: IP50
• Light Source: GaAs Infrared LED (Pulse-Modulated) with a Peak Wavelength of 940 nm
• Mounting Type: Flat Surface
• Output: NPN
• Primary Type: Photoelectric
• Range, Measurement: 5 mm
• Sensing Mode: Reflective
• Technology: Photoelectric
• Temperature, Operating: -10 to +55 °C
• Termination: Connector
• Voltage, Supply: 24 VDC
• Voltage, Switching: 24 VDC
• Weight: 2.6 g (Approx.)
• Response Frequency: 100 Hz
• Enclosure Rating: IP50
• Lead Free Status / Rohs Status: RoHS Compliant part

I/O Circuit Diagrams
NPN Output
Safety Precautions
Refer to Warranty and Limitations of Liability.
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes
Make sure that this product is used within the rated ambient
environment conditions.
● Mounting
The sensing distance for the EE-SPY Reflective-type
Photomicrosensor with built-in amplifier varies from 8 to 20 mm
depending on the product (90% reflective white paper). Do not place
glossy objects in the background of the sensing object.
EE-SPX401
EE-SPY401
EE-SPY402
EE-SPX301
EE-SPY301
EE-SPY302
Model
Precautions for Correct Use
configuration
Light-ON
Dark-ON
Output
WARNING
Light indicator
(red)
Output
transistor
Load 1
(relay)
Load 2
Light indicator
(red)
Output
transistor
Load 1
(relay)
Load 2
Timing charts
Interrupted
Interrupted
Releases
Releases
Operates
Operates
Incident
Incident
OFF
OFF
OFF
OFF
ON
ON
ON
ON
H
H
L
L
● Wiring
Connection is made using a connector. Do not solder to the pins
(leads).
When extending the cable, use an extension cable with conductors
having a total cross-section area of 0.3 mm
must be 2 m maximum.
To use a cable length longer than 2 m, attach a capacitor with a
capacitance of approximately 10 F to the wires as shown below.
The distance between the terminal and the capacitor must be within
2 m.
(Use a capacitor with a dielectric strength that is at least twice the
Sensor's power supply voltage.)
EE-SPX301/401 EE-SPY30/40
* Voltage output (when the sensor is connected to a transistor circuit)
Light indicator (red)
circuit
OUT
Main
2 m max.
A capacitor of
10 μF min.
1.5 to 3 mA
Output circuit
5 to 24 VDC
0 V
OUT
+
−
Ic
Load 2
Load 1
2
. The total cable length
Extension cable
∗
5 to 24 VDC
5