560B 3M, 560B Datasheet - Page 4

• Manufacturer Part Number: 560B
• Description: IDC S/LOK CONNECTOR TAP & PARALLEL, DARK BLUE, 18-14 AWG
• Manufacturer: 3M
• Type: IDCr

Specifications of 560B

• Angle: Straight
• Brand/series: Scotchlok™
• Color: Blue
• Contact Plating: Tin
• Insulation Type: Polypropylene
• Length, Overall: 0.8 "
• Material, Contact: Brass
• Number Of Contacts: 2
• Package Quantity: 100⁄Box, 1000⁄Case
• Primary Type: Tap
• Termination: Wire
• Width, Overall: 0.53 "
• Wire Size: 18-16 AWG
• Wire, Awg: 18-16
• Lead Free Status / Rohs Status: RoHS Compliant part

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy
or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume
all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary
statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one year from the time of purchase. 3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair
the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special,
incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
IMPORTANT NOTICE
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
www.3M.com/electrical
Installation Instructions
1. Place unstripped run wire inside run channel.
2. Insert unstripped tap wire completely.
3. Hold tool perpendicular to the wire and make the
4. Close top hinged cover until latched.
3M and Scotchlok are trademarks of 3M Company.
WARNING
Turn power off before installing or removing terminal. All electri-
cal work should be done according to appropriate electrical
codes.
connection by crimping the u-contact down flush
with the top of the plastic insulator.
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.
.19
.34
.39
©3M 2005 78-8126-5926-2-B
.80
.53
Litho in USA