FD18-187L 3M, FD18-187L Datasheet - Page 4

• Manufacturer Part Number: FD18-187L
• Description: Female Disconnect; 22-18 AWG; Brass; Non-Insulated; Tin
• Manufacturer: 3M

Specifications of FD18-187L

• Angle: Straight
• Brand/series: Highland™, Scotchlok™
• Contact Plating: Tin
• Gender: Female
• Insulation Type: Non-Insulated
• Length, Overall: 0.58 "
• Material, Contact: Brass
• Material, Housing: Brass
• Package Quantity: 50⁄Bag, 10 Bags⁄Case
• Primary Type: Quick Disconnect
• Size, Stud: 0.187 "
• Special Features: Butted Seam, One Barrel
• Standards: UL Listed, CSA Certified
• Termination: Wire
• Wire Size: 22-18 AWG

Engineering Specification
Crimp-Type Female Disconnect Terminals shall,
electrically and mechanically connect permanently to
the prestripped end of a stranded copper wire: and
have a tongue portion with fingers which grip a Male
Disconnect in a separable, reusable manner, forming a
Quick Connect Wiring Termination.
The connector line shall offer a tongue variations
(sized to grip male tabs: 0.187˝ or 0.250˝) and barrel
variations in construction (non-insulated, nylon
insulated with insulation grip, etc.). The tongue
portion shall be marked with the wire range and
manufacturer’s symbol ( ).
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theory asserted.
3M and Scotchlok are trademarks of 3M
The Non Insulated Female Disconnect shall be tin
plated 0.016˝ thick brass, with a tongue for gripping a
0.187˝ male tab of 0.20˝ thickness, and a butted seam
barrel sized for specified (AWG) wire range (22-18,
16-14).
Non-Insulated connectors shall be UL Listed and CSA
Certified. Female Disconnects shall be suitable for
field or factory wiring, with a UL Recognized strain
relief required.
© 3M 2002 78-8126-0637-0-A
Litho in USA.