8055K23Z7V Eaton / Switches, 8055K23Z7V Datasheet - Page 2

• Manufacturer Part Number: 8055K23Z7V
• Description: Switch, Sealed Rockette, Standard Size, SPST, On-None-Off, 15A@125VAC, 10A@250VAC
• Manufacturer: Eaton / Switches
• Type: Rockerr

Specifications of 8055K23Z7V

• Actuator Type: Rectangle
• Contact Form: SPST
• Current, Rating: 15 A
• Dielectric Strength: 1000 V
• Mounting Hole Size: 0.83 × 1.45 In.
• Mounting Type: Snap-In
• Number Of Poles: 1
• Number Of Positions: 2
• Operation: On-None-Off
• Special Features: Non-Illuminated
• Termination: Spade
• Voltage, Rating: 125/250 VAC
• Lead Free Status / Rohs Status: RoHS Compliant part

Contact Mechanism:
Slow-make/Slow-break
contact mechanism.
Butt action contact mechanism
designed specifically for use
on ac and low voltage dc
applications
Contact Material:
3-6A Rated:
Movable — Silver
plated copper.
Stationary — Silver
plated copper.
10-15A Rated:
Movable — Silver-plated
copper with fine or coin silver
contact face button.
Stationary — Copper with
fine or coin silver contact
face button.
20A Rated:
Movable — Silver plated
copper with cad-oxide contact
face button.
Stationary — Copper with
cad-oxide contact face button.
1000W Rated:
Movable — Checon SK015B
contact material welded
to contactor.
Stationary — Copper with
cad-oxide contact face button.
Terminal Types:
Screw Terminals —
Brass designed to accept
#6-32 x 3/16 binding head
screws (Cat. No. 811-2)
Furnished unassembled.
Solder Lug:
6.35mm (.250 ) spade.
Termination Material:
Screw and Spade — Brass.
Solder — Tintillate
plated brass.
Lamps (Sealed Only):
Voltages:
110V ac neon, 14V dc
and 28V dc.
On illuminated version, the
lamp is wired to operate in
conjunction with the switch on
single throw circuit; on double
throw circuits, the lamp is
independent of the switch.
Mounting:
Flush (two screws), sub-panel
and snap-in mounting.
Snap-In Mounting
• Convenient front panel or
• Available in one and two
• Unless otherwise noted,
Dielectric Withstand:
1000V RMS minimum.
sub-panel snap-in mounting.
pole non-illuminated or in
one pole illuminated
Rockette switches. Contact
your Eaton Sales
Representative for three
and four pole circuits.
all switches with Snap-in
Mounting are UL Recognized
and CSA Certified.
Options:
Standard and sealed
•Additional colors of rockers
•Hot stamped or pad printed
•Paddle actuators.
•Single rocker operator on two
•Dry circuits capabilities.
•Special ratings.
•Reversing jumpers.
•Dead back cover (two pole
•Special circuits.
•Printed circuit terminals and
•Metal Snap-in bezels.
•Foam dust seal.
Sealed only
•Special voltage bulbs.
•Industry standard
•Two pole illuminated circuit.
Agency Approvals:
UL Recognized.
CSA Certified.
and bezels are available.
legends on rocker and bezel.
and three pole circuits.
base) with wire leads.
other terminals types.
connector available.
Standard Rockette with Snap-In Mounting
8132K21Z37V52
8144K21H1V52
8132K21F7N52
8057K23Z18V2
Standard Rockette
Standard Rockette
Sealed Rockette
1.21
1