T51E1 ENM Company, T51E1 Datasheet - Page 3

• Manufacturer Part Number: T51E1
• Description: 2070009
• Manufacturer: ENM Company
• Type: Hourr

Specifications of T51E1

• Brand/series: T51 Series
• Cut Out, Panel: 2.12" × 1.25"
• Diameter, Hole: 0.15 in.
• Dimensions: 1.43"W×0.92"H×2.13"D
• Display Range: 6-Digit
• Display Type: Digital
• Function: Hour
• Mounting Type: Panel
• Number Of Digits: 6
• Power, Rating: 0.4 W (Max.)
• Primary Type: Electromechanical
• Voltage, Rating: 230 VAC
• Voltage, Supply: 230 VAC
• Lead Free Status / Rohs Status: RoHS Compliant part

ENM Counting Instruments
B
B
PCB
PC board mounting is common for using counters in add-on PCB
modules to electronic machinery. This type of mounting eliminates the
need for any wires and multiple counters can be assembled as one
unit. The counters are attached by soldering the protruding pins into the
PCB and two or more fasteners are also screwed into the bottom of the
unit for additional support onto the PC board.
R
Rear mounting is similar to PCB mounting except there are no pins for
soldering, only two or more holes on the bottom for threaded or self-
tapping screws. This is an optional type of mounting used mainly when
a suitable panel is not available.
Base mounting is usually a free standing mount and connections are
made with a two or more hole flange at the bottom of the unit. This is a
standard mount for most mechanical counters and is sometimes used
for hour meters when a panel is not available.
ACK OF
ASE
EAR
P
ANEL
Counting Instruments
27