CONTACTS
COIL
40A MINIATURE
POWER RELAY
FEATURES
• Versatility of both PC and “Trace-Saver” quick-connect ter-
• 40 Amp switching capability
• 1 Form A, B and C contacts available
• DC coils to 120 VDC
• Life expectancy to 10 million operations
• Class B insulation for high temperature applications
• Class F (155°C) version available
• Available with an epoxy seal for automatic wave
• Proof Tracking Index (PTI/CTI) 175
• UL, CUR file E44211 including versions meeting UL 508
AZ2100
Arrangement
Ratings
Material
Resistance
Power
Temperature
minals on contacts
soldering and immersion cleaning
and UL 873 spacing and contact rating requirements; VDE
132710 ÜG (some models)
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
SPDT (1 Form C)
SPST (1 Form A and 1 Form B)
Resistive load:
Max. switched power: 900 W or 10000 VA
Max. switched current: 40 A (Form A) 30 A (Form B)
Max. switched voltage: 30 VDC or 300 VAC
UL Rating: See chart for UL contact ratings. AZ2100
Series meets UL 508 Group A spacing and UL 873
refrigeration and safety control requirements. AZ2101
Series meets UL 508 Group B spacing requirements.
VDE Rating:
AZ2100-1A - 16 A at 250 VAC, 10K cycles, resistive
AZ2100-1C - 16 A at 250 VAC, 10k cycles, resistive
Silver cadmium oxide
< 20 milliohms initially
(at rated current, voltage drop method)
500 mW
2.2 W at 20°C (68°F) ambient
1.8 W at 40°C (104°F) ambient
38°C (68°F) at nominal coil voltage
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
GENERAL DATA
Life Expectancy
Operate Time (max.)
Release Time (max.)
Dielectric Strength
(at sea level for 1 min.)
Insulation Resistance
Dropout
Ambient Temperature
Vibration
Shock
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Other coil resistances and sensitivities available upon request.
5. Specifications subject to change without notice.
Mechanical
Electrical
Operating
Storage
Minimum operations
1 x 10
1 x 10
Max. 12 ms
Typical: 8 ms
Max. 5 ms
Typical: 3.5 ms
2500 Vrms contact to coil
1500 Vrms between open contacts
100 megohms min. at 500 VDC, 20°C,
50% RH
Greater than 10% of nominal coil voltage
-55°C (-67°F) to 100°C (212°F) Class B
-55°C (-67°F) to 125°C (257°F) Class F
-55°C (-67°F) to 130°C (266°F) Class B
-55°C (-67°F) to 155°C (311°F) Class F
0.062" DA at 10–55 Hz
20 g
P.B.T. polyester
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
43 grams
Tinned copper alloy, P.C. with quick-con
do not subject the terminals to excessive force.
nect tabs, .250" wide, on top
Note: Allow suitable slack on leads when wiring,
7
5
at 30 A 120 VAC Res. (N.O.)