4223-55ML MG Chemicals, 4223-55ML Datasheet - Page 5

• Manufacturer Part Number: 4223-55ML
• Description: Protective Coating; clear urethane; conformal; can be thinned; 2 oz liquid
• Manufacturer: MG Chemicals
• Type: Protectiver

Specifications of 4223-55ML

• Application: Protective coating for pc boards
• Chemical Component: Ethyl Benzene/Xylene
• Dispensing Method: Bottle
• Primary Type: Coating
• Specific Gravity: 0.95
• Temperature, Rating: +150 °C
• Time, Setting: 10 min.
• Weight: 2 Oz.
• Product: Coating Products
• Size: 2 oz
• Lead Free Status / Rohs Status: RoHS Compliant part Hazardous Materials

Section 13: Disposal Information
General Information:
Section 14: Transportation Information
Ground: (all sizes 4 liter or less)
Classified as Consumer Commodity/ORM-D.
Ground: (all sizes larger than 4 liter)
Shipping Name: PAINT RELATED MATERIAL, UN number: 1263, Class: 3, Packing Group: II, Flash Point: -18°C.
Shipper must be trained and certified. Refer to TDG regulations (Canada), Refer to CFR 49 regulations
(USA).
Air:
Shipper must be trained and certified. Refer to IATA Dangerous Goods Regulations.
Shipping Name: PAINT RELATED MATERIAL, UN number: 1263, Class: 3, Packing Group: II, Flash Point: -18°C.
Subsidiary Risk – nil, Recommend using original MG Chemicals certified outer cartons. Tape all seams on the carton.
Hazard Label required – Flammable Liquid. A double arrow orientation label is required and is already printed on the
original outer carton.
Sea:
Shipper must be trained and certified. Refer to IMDG regulations.
Shipping Name: PAINT RELATED MATERIAL, UN number: 1263, Class: 3, Packing Group: II, Flash Point: -18°C.
Storage category “A”, segregation as for class 9 but away from sources of heat and separated from goods of class 1
except for those in division 1.4.
Section 15: Regulatory Information
CANADA
This product has been classified in accordance with the hazard criteria of the Controlled Products
Regulations and the MSDS contains all of the information required by the Controlled Products Regulations.
DSL
All ingredients in this product are listed on the Domestic Substances List
WHMIS
This product belongs to the following categories: B3, D2B
Industry and Science Canada
MG Labels products intended for the workplace to conform to WHMIS labeling regulations. Product identification, net
quantity declaration, minimum printing type size heights, and packaging of this product are in compliance.
Health Canada
Products produced by MG Chemicals intended for retail display conform to the Canadian Consumer Labeling
Regulations.
USA
CAA (Clean Air Act, USA)
This product does not contain any class 1 ozone depleting substances.
This product does not contain any class 2 ozone depleting substances.
This product does not contain any chemicals listed as hazardous air pollutants.
SARA (Superfund Amendments and Reauthorization Act of 1986, USA, 40 CFR 372.4)
Ethyl Benzene CAS# 100-41-4 (<10%) and Xylene 1330-207 (15-40%) is listed under section 313 as toxic material.
EPCRA (Emergency Planning and Right to Know Act, USA, 40 CFR 372.45
This product contains Ethyl Benzene CAS# 100-41-4 (<10%) and Xylene 1330-207 (15-40%) a toxic chemical
subject to the reporting requirements of section 313 Title III of the SARA of 1986 and 40 CFR part 372.
TSCA (Toxic Substances Control Act of 1976, USA)
All substances are TSCA listed.
Dispose of in accordance with all local, provincial, state, and federal regulations. Water
runoff can cause environmental damage.
PAGE 3 / 4
Registered Quality System ISO 9001
MSDS Code: 4223 - Liquid
Burlington, Ontario, Canada
QMI Certificate #004008