AXA010A0Y93-SRZ Lineage Power, AXA010A0Y93-SRZ Datasheet - Page 19

• Manufacturer Part Number: AXA010A0Y93-SRZ
• Description: DC/DC Converters & Regulators 1.8Vout 10A SMT 10-14Vin
• Manufacturer: Lineage Power
• Series: AXA010r

Specifications of AXA010A0Y93-SRZ

• Product: Non-Isolated / POL
• Output Power: 18 W
• Input Voltage Range: 10 V to 14 V
• Number Of Outputs: 1
• Output Voltage (channel 1): 1.8 V
• Output Current (channel 1): 10 A
• Package / Case Size: SMD
• Output Type: Non-Isolated
• Output Voltage: 1.8 V
• Package / Case: SMD
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: CC109102902

Data Sheet
March 14, 2006
Surface Mount Information
Lead Free Soldering
The –Z version Austin Lynx 12V SMT modules are
lead-free (Pb-free) and RoHS compliant and are both
forward and backward compatible in a Pb-free and a
SnPb soldering process. Failure to observe the
instructions below may result in the failure of or cause
damage to the modules and can adversely affect
long-term reliability.
Pb-free Reflow Profile
Power Systems will comply with J-STD-020 Rev. C
(Moisture/Reflow Sensitivity Classification for
Nonhermetic Solid State Surface Mount Devices) for
both Pb-free solder profiles and MSL classification
procedures. This standard provides a recommended
forced-air-convection reflow profile based on the
volume and thickness of the package (table 4-2). The
suggested Pb-free solder paste is Sn/Ag/Cu (SAC).
The recommended linear reflow profile using
Sn/Ag/Cu solder is shown in Fig. 36.
MSL Rating
The Austin Lynx 12V SMT modules have a MSL
rating of 2.
Storage and Handling
The recommended storage environment and handling
procedures for moisture-sensitive surface mount
packages is detailed in J-STD-033 Rev. A (Handling,
Packing, Shipping and Use of Moisture/Reflow
Sensitive Surface Mount Devices). Moisture barrier
bags (MBB) with desiccant are required for MSL
ratings of 2 or greater. These sealed packages
should not be broken until time of use. Once the
original package is broken, the floor life of the product
at conditions of ≤ 30°C and 60% relative humidity
varies according to the MSL rating (see J-STD-033A).
The shelf life for dry packed SMT packages will be a
minimum of 12 months from the bag seal date, when
stored at the following conditions: < 40° C, < 90%
relative humidity.
Post Solder Cleaning and Drying
Considerations
Post solder cleaning is usually the final circuit-board
assembly process prior to electrical board testing. The
result of inadequate cleaning and drying can affect
both the reliability of a power module and the
testability of the finished circuit-board assembly. For
guidance on appropriate soldering, cleaning and
drying procedures, refer to Board Mounted Power
LINEAGE
POWER
10 – 14 Vdc input; 1.2Vdc to 5.5Vdc Output; 10A output current
(continued)
Austin Lynx
TM
Modules: Soldering and Cleaning Application Note
(AN04-001).
Figure 36. Recommended linear reflow profile
using Sn/Ag/Cu solder.
12 V SMT Non-isolated Power Modules:
300
250
200
150
100
50
0
Per J-STD-020 Rev. C
Heating Zone
1°C/Second
Peak Temp 260°C
Reflow Time (Seconds)
* Min. Time Above 235°C
*Time Above 217°C
15 Seconds
60 Seconds
Cooling
Zone
19