A14162-02 Laird Technologies, A14162-02 Datasheet - Page 2

• Manufacturer Part Number: A14162-02
• Description: Thermal Interface Products Tflex 280V0 18x18 1.1W/mK
• Manufacturer: Laird Technologies

Specifications of A14162-02

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

STANDARD THICKNESSES
0.020" (0.51mm)
0.060" (1.52mm)
0.100" (2.54mm)
0.140" (3.56mm)
0.180" (4.57mm)
Consult the factory for alternate thicknesses
Construction &
Composition
Color
Thickness
Thickness Tolerance
Density
Hardness
Tensile Strength
% Elongation
Outgassing TML
(Post Cured)
Outgassing CVCM
(Post Cured)
UL Flammability Rating
Temperature Range
Thermal Conductivity
Total Thermal
Resistance
@ 10 psi
@ 69KPa
Coefficient of
Thermal Expansion
Breakdown Voltage
Volume Resistivity
Dielectric Constant
Innovative Technology
@ 1MHz
for a Connected World
0.030" (0.76mm)
0.070" (1.78mm)
0.110" (2.79mm)
0.150" (3.81mm)
0.190" (4.83mm)
Reinforced ceramic filled
silicone elastomer
0.02" (0.508mm)
4 x 10
12,000 Volts AC
Tflex™ 220 V0
-45°C to 160°C
5.13 °C-cm
35°C to 130°C
0.80 °C-in
(± 0.05mm)
50 Shore 00
229 ppm/°C
1.75 g/cm
Light Gray
1.1 W/mK
± 0.002"
464 psi
0.34%
0.10%
94 VO
10.5
13
5.5
ohm-cm
2
2
/W
0.040" (1.02mm)
0.080" (2.03mm)
0.120" (3.05mm)
0.160" (4.06mm)
0.200" (5.08mm)
3
/W
10.13 °C-cm
silicone elastomer
0.04" (1.016mm)
4 x 10
-45°C to 160°C
THR-DS-Tflex-200V0 0710
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and ap-
plication of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness,
merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All
Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2010 Laird
Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company
thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.
A14175-00 Rev. G, 08/13/08
Tflex™ 240 V0
35°C to 130°C
>27,000 Volts
1.57 °C-in
Ceramic filled
45 Shore 00
229 ppm/°C
(± 0.10mm)
1.73 g/cm
Light Gray
1.1 W/mK
± 0.004"
0.34%
0.10%
48 psi
94 VO
63.0
13
5.5
ohm-cm
0.050" (1.27mm)
0.090" (2.29mm)
0.130" (3.30mm)
0.170" (4.32mm)
2
2
/W
/W
3
silicone elastomer
0.06" (1.524mm)
13.23 °C-cm
4 x 10
-45°C to 160°C
Tflex™ 260 V0
35°C to 130°C
>27,000 Volts
2.05 °C-in
Ceramic filled
229 ppm/°C
(± 0.15mm)
45 Shore 00
1.73 g/cm
Light Gray
± 0.006"
1.1 W/mK
0.34%
0.10%
48 psi
94 VO
60.6
13
5.5
ohm-cm
2
/W
2
3
/W
STANDARD SHEET SIZES
9" x 9" (229mm x 229mm) Tflex™ 200V0 may be die cut into individual
shapes. Pressure sensitive adhesive is not applicable for Tflex™ products.
REINFORCEMENT
0.020" (0.51mm) and 0.030" (0.762mm) are fiberglass reinforced.
Data for design engineer guidance only. Observed performance varies in
application. Engineers are reminded to test the material in application.
Tflex
silicone elastomer
0.08" (2.032mm)
16.19 °C-cm
4 x 10
-45°C to 160°C
Tflex™ 280 V0
35°C to 130°C
>27,000 Volts
2.51 °C-in
Ceramic filled
45 Shore 00
229 ppm/°C
(± 0.20mm)
1.73 g/cm
Light Gray
1.1 W/mK
± 0.008"
0.34%
0.10%
48 psi
94 VO
60.6
13
5.5
ohm-cm
2
/W
3
2
TM
/W
Thermal Gap Filler
200 V0 Series
silicone elastomer
Tflex™ 2100 V0
18.90 °C-cm
4 x 10
0.10"(2.54mm)
-45°C to 160°C
35°C to 130°C
>27,000 Volts
2.93 °C-in
Ceramic filled
45 Shore 00
229 ppm/°C
(± 0.25mm)
1.73 g/cm
Light Gray
1.1 W/mK
± 0.010"
0.34%
0.10%
48 psi
94 VO
60.6
13
5.5
ohm-cm
2
/W
3
2
/W
Helium Pycnometer
TEST METHOD
ASTM D5470
ASTM D2240
ASTM D5470
IPC-TM-650
ASTM D412
ASTM D412
ASTM E595
ASTM E595
ASTM D149
ASTM D257
(modified)
(modified)
E180840
2.4.24
Visual