A10100-02 Laird Technologies, A10100-02 Datasheet - Page 2

• Manufacturer Part Number: A10100-02
• Description: Thermal Interface Products Tpli 280 A1 8x8 6 W/mK gap filler
• Manufacturer: Laird Technologies

Specifications of A10100-02

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

STanDarD ThicknESSES
0.010” (0.25mm)
0.030” (0.76mm)
0.070” (1.78mm)
0.110” (2.79mm)
0.150” (3.81mm)
0.190” (4.83mm)
STanDarD ShEET SizES
8” x 8” (203mm x 203 mm) & 16” x 16” (406mm x 406mm). Tpli™ 200 may be die cut
into individual shapes.
Construction &
Composition
Color
Thickness
Thickness Tolerance
Density
Hardness
Tensile Strength
% elongation
Outgassing TML
(post Cured)
Outgassing CVCM
(post Cured)
UL Flammability Rating
Temperature Range
Thermal Conductivity
Thermal Impedance
@ 20 psi @ 138Kpa
Thermal expansion
Breakdown Voltage
Volume Resistivity
Dielectric Constant
@ 1MHz
Innovative Technology
for a Connected World
0.015” (0.38mm)
0.040” (1.02mm)
0.080” (2.03mm)
0.120” (3.05mm)
0.160” (4.06mm)
0.200” (5.08mm)
Reinforced boron nitride
filled silicone elastomer
0.010” (0.25mm)
5 x 10
-45°C to 200°C
1.03°C - cm
0.16°C - in
1,000 Volts AC
(± 0.025mm)
75 Shore OO
TpLI™ 210
51 ppm/C
± 0.001”
1.44 g/cc
6 W/mK
0.08%
0.03%
94 HB
Rose
3.21
N/A
N/A
13
ohm-cm
0.020” (0.51mm)
0.050” (1.27mm)
0.090” (2.29mm)
0.130” (3.30mm)
0.170” (4.32mm)
Consult the factory for alternate thicknesses.
2
2
/W
/W
Boron nitride filled
silicone elastomer
0.020” (0.51mm)
5 x 10
-45°C to 200°C
1.35°C - cm
0.21°C - in
4,000 Volts AC
THR-DS-Tpli-200 0710
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and ap-
plication of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness,
merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All
Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2010 Laird
Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company
thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.
A13519-00 Rev G, 2/05/07
70 Shore OO
(± 0.05mm)
TpLI™ 220
123 ppm/C
± 0.002”
1.43 g/cc
6 W/mK
0.07%
0.02%
35 psi
94 HB
3.21
Blue
13
0.025” (0.64mm)
0.060” (1.52mm)
0.100” (2.54mm)
0.140” (3.56mm)
0.180” (4.57mm)
5
ohm-cm
2
2
/W
/W
Boron nitride filled
silicone elastomer
0.040” (1.02mm)
5 x 10
>5,000 Volts AC
-45°C to 200°C
2.45°C - cm
0.37°C - in
70 Shore OO
(± 0.08mm)
TpLI™ 240
72 ppm/C
± 0.003”
1.43 g/cc
6 W/mK
prESSUrE SEnSiTivE aDhESivE
Request no adhesive with”AO” suffix. Request adhesive on one side with “A1” suffix.
Double sided adhesive is not available
rEinforcEMEnT
Fiberglass is required in thicknesses of 0.010” (0.25mm) and 0.015” (0.38mm).
Reinforcement is optional in thicknesses 0.020” (0.5mm) and 0.025” (0.63mm).
Indicate fiberglass by “FG” suffix. Thicknesses above 0.025” (0.063mm) are
not reinforced.
Data for design engineer guidance only. Observed performance varies in application.
engineers are reminded to test the material in application.
0.07%
0.02%
Yellow
35 psi
94 HB
3.26
13
5
ohm-cm
2
2
/W
/W
Boron nitride filled
silicone elastomer
0.060” (1.52mm)
>5,000 Volts AC
5 x 10
-45°C to 200°C
3.35°C - cm
0.49°C - in
70 Shore OO
(± 0.10mm)
TpLI™ 260
72 ppm/C
± 0.004”
1.38 g/cc
6 W/mK
0.10%
0.04%
94 HB
20 psi
3.26
Grey
13
5
ohm-cm
Tpli
2
2
/W
/W
TM
Boron nitride filled
silicone elastomer
0.100” (2.54mm)
5 x 10
>5,000 Volts AC
5.81°C - cm
-45°C to 200°C
0.84°C - in
TpLI™ 2100
70 Shore OO
(± 0.18mm)
200 Series
96 ppm/C
± 0.007”
1.36 g/cc
6 W/mK
0.15%
0.07%
15 psi
94 HB
Grey
13
3.4
5
ohm-cm
Gap Filler
2
2
/W
/W
TeST MeTHOD
ASTM D2240
ASTM D5470
ASTM D5470
IpC-TM-650
ASTM D412
ASTM D412
ASTM e595
ASTM e595
ASTM D149
ASTM D257
ASTM D150
pycnometer
(modified)
(modified)
e180840
Helium
2.4.24
Visual