A10114-02 Laird Technologies, A10114-02 Datasheet - Page 2

• Manufacturer Part Number: A10114-02
• Description: Thermal Interface Products Tgard 220 A1 8 x 8
• Manufacturer: Laird Technologies

Specifications of A10114-02

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Innovative Technology
for a Connected World
Standard thicknesses:
Standard sheet sizes:
Pressure sensitive adhesive:
Reinforcement:
Data for design engineer guidance only. Observed performance varies in application. Engineers are reminded to test the material in application.
Construction &
Composition
Color
Thickness
Thickness tolerance
Specific Gravity (Density)
Hardness
Tensile Strength
% Elongation
Outgassing TML (Post Cured)
Outgassing CVCM (Post Cured )
UL Flammability Rating
Temperature Range
Thermal Conductivity
Thermal Impedance
@ 100 psi
@ 689 KPa
Breakdown Voltage
Volume Resistivity
Dielectric Constant @ 1 MHz
THR-DS-Tgard-200 0710
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to
the fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential
damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon
request. © Copyright 2010 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird
Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third
party intellectual property rights. A13514-00 Rev H
Reinforced boron nitride
filled silcone elastomer
±0.002” (±0.05mm)
0.010” (0.25mm)
Thermally Conductive Insulators
5x10 13 ohm-cm
TGARD
-60ºC to 200ºC
1.17°C-cm²/W
0.18°C-in²/W
85 Shore A
6,000 VAC
1.52 g/cc
5 W/mK
0.06%
0.05%
White
94 V0
3.32
N/A
N/A
TM
210
0.010” (0.25mm), 0.020” (0.51mm), 0.030” (0.76mm)
Please contact Laird Technologies for alternate thicknesses.
0.010”: 14” x 16” (356mm x 406mm), 0.020” and 0.030”: 16” x 16” (406mm x 406mm)
Individual die-cut shapes can be supplied.
Request no adhesive with “AO” suffix. Request adhesive on one side with “A1” suffix.
Double-sided adhesive is not available.
Tgard
TM
200 sheets are fiberglass reinforced.
Reinforced boron nitride
filled silcone elastomer
±0.002” (±0.05mm)
Tgard
0.020” (0.51mm)
5x10 13 ohm-cm
TGARD
-60ºC to 200ºC
2.26°C-cm²/W
0.35°C-in²/W
10,000 VAC
80 Shore A
1.45 g/cc
5 W/mK
0.06%
0.05%
94 V1
3.32
Blue
N/A
N/A
TM
220
TM
Reinforced boron nitride
filled silcone elastomer
±0.003” (±0.075mm)
200 Series
0.030” (0.76mm)
5x10 13 ohm-cm
TGARD
-60ºC to 200ºC
2.28°C-cm²/W
0.40°C-in²/W
20,000 VAC
80 Shore A
Not Rated
1.47 g/cc
5 W/mK
0.06%
0.05%
Green
3.32
N/A
N/A
TM
230
ASTM D2240
ASTM D5470
ASTM D5470
ASTM D412
ASTM D412
ASTM E595
ASTM E595
ASTM D149
ASTM D257
ASTM D150
Pycnometer
METHOD
(modified)
(modified)
E180840
Helium
Visual
TEST