CS42L55-DNZR Cirrus Logic Inc, CS42L55-DNZR Datasheet - Page 53

• Manufacturer Part Number: CS42L55-DNZR
• Description: IC CODEC STER H-HDPN AMP 36-QFN
• Manufacturer: Cirrus Logic Inc
• Type: Stereo Audior

Specifications of CS42L55-DNZR

• Data Interface: Serial
• Resolution (bits): 24 b
• Number Of Adcs / Dacs: 1 / 1
• Sigma Delta: Yes
• Dynamic Range, Adcs / Dacs (db) Typ: 95 / 99
• Voltage - Supply, Analog: 1.65 V ~ 2.71 V
• Voltage - Supply, Digital: 1.65 V ~ 2.71 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 36-QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1506 - BOARD EVAL FOR CS42L55 CODEC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

DS680F1
6.13.4 HP/Speaker De-emphasis
6.13.5 Digital Soft Ramp
6.13.6 Digital Zero Cross
Configures a 15µs/50µs digital de-emphasis filter response on the headphone/line and speaker outputs
Configures an incremental volume ramp from the current level to the new level at the specified rate.
Notes:
1. When the DIGSFT bit is enabled, the Master Volume (MSTxVOL[7:0]) transitions are guaranteed to
Configures when the signal level changes occur for the digital volume controls.
Notes:
1. If the signal does not encounter a zero crossing, the requested volume change will occur after a
2. The zero cross function is independently monitored and implemented for each channel.
3. The DIS_LIMSFT bit
4. When the DIGSFT bit is enabled, the Master Volume (MSTxVOL[7:0]) transitions are guaranteed to
DEEMPHASIS
0
1
DIGSFT
0
1
Ramp Rate:
DIGZC
0
1
occur with a soft ramp only when
timeout period between 1024 and 2048 sample periods (21.3 ms to 42.7 ms at 48 kHz sample rate).
occur on a zero crossing only when
Control Port Status
Disabled
Enabled
Volume Changes
Do not occur with a soft ramp
Occur with a soft ramp
1/8 dB every LRCK cycle
Volume Changes
Do not occur on a zero cross-
ing
Occur on a zero crossing
(“Limiter Soft Ramp Disable” on page
bits 7 and 6 in register 29h are set to ‘00’b.
bits 7 and 6 in register 29h are set to ‘00’b.
Affected Digital Volume Controls
MSTxMUTE
HPxMUTE, SPKxMUTE
ADCxVOL[7:0]
AMIXxMUTE, AMIXxVOL[7:0]
PMIXxMUTE, PMIXxVOL[7:0]
MSTxVOL[7:0]
HPxVOL[7:0]
SPKxVOL[7:0]
ALC and Limiter Attack/Release
Beep Volume
Affected Digital Volume Controls
MSTxMUTE
AMIXxMUTE, AMIXxVOL[7:0]
PMIXxMUTE, PMIXxVOL[7:0]
MSTxVOL[7:0]
ALC and Limiter Attack/Release
Beep Volume
5/13/08
(“Master Playback Mute” on page
(“Master Playback Mute” on page
(“Headphone Volume Control” on page
(“Beep Volume” on page
(“Beep Volume” on page
(“Speaker Volume Control” on page
(“ADCx Volume” on page
(“Master Volume Control” on page
(“Master Volume Control” on page
(“Playback Control 2 (Address 0Fh)” on page
65) is ignored when zero cross is enabled.
(“PCM Mixer Channel x Volume” on page
(“PCM Mixer Channel x Volume” on page
(“ADC Mixer Channel x Volume” on page
(“ADC Mixer Channel x Volume” on page
(page 66
(page 66
61)
61)
57),
to
to
page
page
52),
52),
63),
63),
68)
68)
64),
63),
CS42L52
54),
58),
58),
58),
58),
53
.