E2C-CR8A Omron, E2C-CR8A Datasheet - Page 3

• Manufacturer Part Number: E2C-CR8A
• Description: Proximity Sensors SEP.AMP.PROX 3.MM 1.8mm DIST
• Manufacturer: Omron
• Series: E2Cr

Specifications of E2C-CR8A

• Maximum Operating Temperature: + 70 C
• Sensing Distance: 0.8 mm
• Minimum Operating Temperature: - 25 C
• Sensor Type: Inductive
• Sensing Object: Metallic
• Response Frequency: 1kHz
• Material - Body: Stainless Steel
• Shielding: Shielded
• Voltage - Supply: -
• Output Type: -
• Terminal Type: 2-Wire
• Package / Case: Cylinder
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

SRT1-P P P P P P P P D04S
Specifications
3 CHARACTERISTICS
CompoBus/S Sensor Amplifier Terminals
Note: 1. The communications power supply voltage must be 20.4 to 26.4 VDC if the Terminal is connected to 2-wired proximity sensors.
E3X-NP P P P Fiber-optic Amplifiers
Model
Communications
power supply voltage
I/O points
Connected sensors
Current consumption
Dielectric strength
Noise immunity
Vibration resistance
Shock resistance
Mounting method
Mounting strength
Terminal strength
Ambient temperature
Ambient humidity
Weight
Current consumption
Response time
Timer function
Remote teaching input
Indicator
Teaching confirmation
Output
Ambient illumination
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Mounting method
Mounting strength
Ambient temperature
Ambient humidity
Weight
2. When adding Amplifier Terminals, use SRT1-XID04S or SRT1-XKD04S.
3. The value doesn’t include the current consumption of Amplifier Terminals.
Model
Item
SRT1-TID04S
14 to 26.4 VDC (See Note 1)
4 input points
Total of four E3X-NTP6 or
E39-JID01 (See Note 2)
60 mA max. (See Note 3)
500 VAC for 1 min (1 mA sensing current between insulated circuits)
Power supply normal:
Power supply common: 1,500 V for 10 minutes with a pulse width of 100 ns to 1 s
10 to 55 Hz, 1.5 mm double amplitude
Malfunction: 200 m/s
Destruction: 300 m/s
M4 screw mounting or 35 mm DIN track mounting
No damage when 50 N pull load was applied for 10 s in all directions
(except the DIN track directions and a pulling force of 10 N)
No damage when 49 N pull load was applied for 10 s in all directions.
Tighten each screw to a torque of 0.6 to 1.18 N : m.
Operating: 0 C to 55 C (32 to 131 F) with no icing or condensation
Storage: --20 C to 65 C (--4 to 149 F) with no icing or condensation
Operating: 35% to 85%
70 g max.
75 mA max.
1 ms max. (4.0 ms max.
when connected to the
SRM1-PPD04S)
Not available
Not available
Orange LED: Lit during output operation
Green LED: Lit with stable light reception or no light
Indicators (red/green LED) and buzzer
Light ON and Dark ON switch selectable
Sunlight: 10,000 lux max.; incandescent lamp: 3,000 lux max.
20 M max. at 500 VDC
1,000 VAC at 50/60 Hz for 1 minute
Destruction:10 to 55 Hz, 1.5 mm double amplitude
Destruction:500 m/s
Connector connection to the SRT1-PPD04S
No damage when 49 N pull load was applied for 10 s in all directions
Operating: 0 C to 55 C (32 to 131 F) with no icing or condensation
Storage: --20 C to 65 C (--4 to 149 F) with no icing or condensation
Operating: 35% to 85%
30 g max.
E3X-NH16
Communication terminals
2
2
2
600 V for 10 minutes with a pulse width of 100 ns to 1 s
50 mA max.
500 S max. (2.0 ms max. when connected to the SRT1-PPD04S)
30 g max.
SRT1-TKD04S
One E3X-NM16
(See Note 2)
65 g max.
E3X-NT16
OFF--delay timer (fixed to 40 ms)
Available (Remote teaching disabled)
30 g max.
SRT1-XID04S
------
Total of four E3X-NTP6
or E39-JID01
10 mA max. (See Note 3)
45 g max.
E3X-NT26
Expansion terminals
150 mA
60 g max.
SRT1-XKD04S
One E3X-NM16
35 g max.
------
SRT1-P P P P P P P P D04S
E3X-NM16
3