TL-Q2MC1 2M Omron, TL-Q2MC1 2M Datasheet - Page 8

• Manufacturer Part Number: TL-Q2MC1 2M
• Description: Proximity Sensors UNSH NPN NO MINI BLK
• Manufacturer: Omron
• Series: TL-Qr

Specifications of TL-Q2MC1 2M

• Maximum Operating Temperature: + 60 C
• Supply Voltage: 10 V to 30 V
• Mounting Style: Screw
• Sensing Distance: 2 mm
• Minimum Operating Temperature: - 10 C
• Features: NO
• Sensor Type: Inductive
• Sensing Object: Metallic
• Response Frequency: 500Hz
• Material - Body: ABS Resin
• Shielding: Unshielded
• Voltage - Supply: 10 V ~ 30 V
• Output Type: NPN-NO
• Terminal Type: 3-Wire
• Package / Case: Box
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Parallel or Face-to-face Mounting
Rectangular Models
TL-Q/TL-G
Thin Models
Model
TL-Q5MC
TL-Q5MCj5
TL-Q5MD
TL-Q5MDj5
Model
TL-Q2
TL-Q2j5
Model
TL-G3D-3
C
60 mm (2.36 in)
17 mm (0.67 in)
60 mm (2.36 in)
30 mm (1.18 in)
C
30 mm (1.18 in)
8 mm (0.32 in)
C
31 mm (1.22 in)
D
120 mm (4.7 in)
60 mm (2.36 in)
120 mm (4.7 in)
80 mm (3.15 in)
D
90 mm (3.54 in)
45 mm (1.77 in)
D
25 mm (0.98 in)
J SENSING TARGETS AND POSITION
TL-G3D-3 Grooved Model
If the TL-G3D-3 is in high-speed response operation with a
toothed metal plate, be sure that the target object size is as large
as or larger than the standard object size and that the target
objects are separated enough from one another.
The response frequency obtainable when the following toothed
metal plate is used will be 1 kHz or higher. If the metal plate is
smaller with shorter teeth and narrow adjacent space, the
response frequency will decrease.
Be sure that the distance between the bottom of the groove and
the sensing object is 1 mm or less.
TL-Q Rectangular Model
The sensing distance decreases with non-ferrous metal. Refer to
Target Object Size and Material vs. Sensing Distance (Typical) in
Engineering Data. If the target is a metal foil that is as thin or
thinner than 0.01 mm, there will be little difference in sensing
distance between the metal foil and ferrous metal. If the target is,
however, extremely thin (e.g., metal-coating film) or not
conductive, the object will not be detected.
J INFLUENCE OF PLATING
The following percentage values indicate decreases or increases
in sensing distance on the basis of the sensing target with no
metal plating as 100%.
Metal plating type and thickness
Metal plating type and thickness
No metal plating
Zn5 to 15 µm
Cd5 to 15 µm
Ag5 to 15 µm
Cu10 to 20 µm
Cu5 to 15 µm
Cu (5 to 10 µm) + Ni (10 to 20 µm)
Cu (5 to 10 µm) + Ni (10 µm) + Cr (0.3 µm)
CONTROL
1 mm max.
Material: Iron
t=0.5 mm
15 min.
Sensing object
10 min.
TL-Q/TL-G
Material
Iron
100
90 to 120
100 to 110
60 to 90
70 to 95
---
75 to 95
75 to 95
9