FTR-F3AA024E-HA Fujitsu, FTR-F3AA024E-HA Datasheet - Page 6

• Manufacturer Part Number: FTR-F3AA024E-HA
• Description: General Purpose / Industrial Relays SPST-NO 24 VDC 5A
• Manufacturer: Fujitsu
• Series: FTR-F3r

Specifications of FTR-F3AA024E-HA

• Contact Form: SPST - NO
• Coil Voltage: 24 VDC
• Contact Rating: 5 A
• Contact Termination: PCB
• Mounting Style: PCB
• Power Consumption: 0.2 W
• Contact Material: Silver Alloy
• Coil Resistance: 2880 Ohms
• Coil Type: Standard (200 mW)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

RoHs Compliance and Lead Free Relay Information
. General Information
l
l
l
l
l
l
l
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
2. Recommended Lead Free Solder Profile
l
Reflow Solder condition
3. Moisture sensitivity
l
4. Tin Whisker
l
Relays produced after the specific date code that is indicated on each data sheet are lead-free
Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
All signal and power relays also comply with RoHS. Please refer to individual data
It has been verified that using lead-free relays in leaded assembly process will not cause any
“LF” is marked on each outer and inner carton. (No marking on individual relays).
To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office.
Flow Solder condition:
Pre-heating:
Soldering:
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
We will ship leaded relays as long as the leaded relay inventory exists.
Moisture Sensitivity Level standard is not applicable to electromechanical realys.
Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.
now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
problems (compatible).
Recommended solder paste Sn-3.0Ag-0.5Cu.
We highly recommend that you confirm your actual solder conditions
maximum 120˚C
dip within 5 sec. at
260˚C soler bath
maximum 3 sec.
FTR-F3-HA sERIEs
6