604-00050 Parallax Inc, 604-00050 Datasheet - Page 17

• Manufacturer Part Number: 604-00050
• Description: IC FLOATING-PT COPROC V3 18-DIP
• Manufacturer: Parallax Inc

Specifications of 604-00050

• Processor Type: Floating-Point Co-Processor
• Voltage: 2.7V ~ 5.5V
• Mounting Type: Through Hole
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Speed: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Program – program user function memory
The Program command is used to program the user function memory. Once in program mode, the uM-FPU looks for
valid Intel Hex format records. The records must have an address between 0x0000 and 0x03C0, start on a 64-byte
boundary, and have a length of 1 to 64 bytes. The data is not echoed, but an acknowledge character is sent after each
record. The acknowledge characters are as follows:
The uM-FPU IDE program (or another PC based application program) would normally be used to send the required
data for the program command. (See documentation for the uM-FPU IDE application program.) To exit the program
mode, an escape character
is sent. The program command will reset the uM-FPU on exit.
Micromega Corporation
+
F
A
C
P
>$P
{*** PROGRAM MODE ***}
+++
{RESET}
The record was programmed successfully.
A format error occurred.
An address error occurred.
A checksum error occurred.
A programming error occurred.
17
uM-FPU V3.1 Datasheet
Debug Monitor