CY8C20346-24LQXIT Cypress Semiconductor Corp, CY8C20346-24LQXIT Datasheet - Page 3

• Manufacturer Part Number: CY8C20346-24LQXIT
• Description: IC CAPSENSE AP 16K 2048B 24UQFN
• Manufacturer: Cypress Semiconductor Corp
• Series: CapSense® Controllersr

Specifications of CY8C20346-24LQXIT

• Applications: Capacitive Sensing
• Core Processor: M8C
• Program Memory Type: FLASH (16 kB)
• Controller Series: CY8C20xx6
• Ram Size: 2K x 8
• Interface: I²C, SPI
• Number Of I /o: 20
• Voltage - Supply: 1.71 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 24-UQFN Exposed Pad, 24-HUQFN
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Technology: CMOS
• Processing Unit: Microprocessor
• Operating Supply Voltage (min): 1.71V
• Operating Supply Voltage (typ): 1.8/2.5/3.3/5V
• Operating Supply Voltage (max): 5.5V
• Package Type: QFN EP
• Screening Level: Industrial
• Pin Count: 24
• Mounting: Surface Mount
• Rad Hardened: No
• Processor Series: CY8C20x46
• Core: M8C
• Development Tools By Supplier: CY3280-20X66
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant

PSoC
The PSoC family consists of on-chip Controller devices. These
devices are designed to replace multiple traditional MCU-based
components with one, low cost single-chip programmable
component. A PSoC device includes configurable analog and
digital blocks, and programmable interconnect. This architecture
allows the user to create customized peripheral configurations,
to match the requirements of each individual application.
Additionally, a fast CPU, Flash program memory, SRAM data
memory, and configurable I/O are included in a range of
convenient pinouts.
The architecture for this device family, as shown in the
Block Diagram on page
Core, the CapSense Analog System, and the System Resources
(including a full speed USB port). A common, versatile bus allows
connection between I/O and the analog system. Each
CY8C20x36/46/66/96 PSoC Device includes a dedicated
CapSense block that provides sensing and scanning control
circuitry for capacitive sensing applications. Depending on the
PSoC package, up to 36 general purpose IO (GPIO) are also
included. The GPIO provides access to the MCU and analog
mux.
PSoC Core
The PSoC Core is a powerful engine that supports a rich
instruction set. It encompasses SRAM for data storage, an
interrupt controller, sleep and watchdog timers, and IMO
(internal main oscillator) and ILO (internal low speed oscillator).
The CPU core, called the M8C, is a powerful processor with
speeds up to 24 MHz. The M8C is a 4-MIPS, 8-bit Harvard archi-
tecture microprocessor.
System Resources provide additional capability, such as
configurable
communication interface, three 16-bit programmable timers, and
various system resets supported by the M8C.
The Analog System is composed of the CapSense PSoC block
and an internal 1.2V analog reference, which together support
capacitive sensing of up to 36 inputs.
CapSense Analog System
The Analog System contains the capacitive sensing hardware.
Several hardware algorithms are supported. This hardware
performs capacitive sensing and scanning without requiring
external components. Capacitive sensing is configurable on
each GPIO pin. Scanning of enabled CapSense pins are
completed quickly and easily across multiple ports.
Document Number: 001-12696 Rev. *E
®
Functional Overview
USB
and
2, is comprised of three main areas: the
I2C
slave/SPI
master-slave
Logic
Figure 1. Analog System Block Diagram
Analog Multiplexer System
The Analog Mux Bus can connect to every GPIO pin. Pins are
connected to the bus individually or in any combination. The bus
also connects to the analog system for analysis with the
CapSense block comparator.
Switch control logic enables selected pins to precharge
continuously under hardware control. This enables capacitive
measurement for applications such as touch sensing. Other
multiplexer applications include:
■
■
■
When designing capacitive sensing applications, refer to the
latest signal-to-noise signal level requirements Application
Notes, which can be found under
Documentation > Application Notes. In general, and unless
otherwise noted in the relevant Application Notes, the minimum
signal-to-noise ratio (SNR) for CapSense applications is 5:1.
Complex capacitive sensing interfaces, such as sliders and
touchpads.
Chip-wide mux that allows analog input from any I/O pin.
Crosspoint connection between any I/O pin combinations.
Vr
IMO
Comparator
IDAC
Reference
Buffer
Clock Select
CapSense
Cap Sense Counters
CSCLK
Mux
Mux
CY8C20X36/46/66/96
Refs
Oscillator
http://www.cypress.com
Cinternal
Page 3 of 39
>
[+] Feedback