20-101-0554 Rabbit Semiconductor, 20-101-0554 Datasheet - Page 13

• Manufacturer Part Number: 20-101-0554
• Description: COMPUTER SNGL BD BL2000 BOTT MNT
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0554

• Module/board Type: Single Board Computer Module
• For Use With/related Products: BL2000
• Lead Free Status / RoHS Status: Vendor undefined / Vendor undefined

3. Connect the power supply.
First, prepare the AC adapter for the country where it will be used by selecting the plug.
The BL2000 Tool Kit presently includes Canada/Japan/U.S., Australia/N.Z., U.K., and
European style plugs. Snap in the top of the plug assembly into the slot at the top of the
AC adapter as shown in Figure 4, then press down on the spring-loaded clip below the
plug assembly to allow the plug assembly to click into place.
Connect the bare ends of the power supply to the
terminal header J2 as shown in Figure 4.
4. Apply power.
Plug in the AC adapter. If you are using your own power supply, it must provide 9 V to 40 V
DC—voltages outside this range could damage the BL2000.
User’s Manual
CAUTION: Unplug the power supply while you make or otherwise work with the connections
NOTE:
NOTE: A hardware RESET is done by unplugging the AC adapter, then plugging it back in,
to the headers. This will protect your BL2000 from inadvertent shorts or power spikes.
should come on, indicating that the BL2000 is now ready to be used.
or by momentarily grounding the board reset input at pin 9 on screw-terminal header J2.
The green
PWR
Figure 4. Power Supply Connection
LED and the red
BAD
+RAW
LED on the opposite end of the board
and
GND
positions on screw-
9