101-0546 Rabbit Semiconductor, 101-0546 Datasheet - Page 18

• Manufacturer Part Number: 101-0546
• Description: COMPUTER SNGL BD BL2130 BOTT MNT
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0546

• Module/board Type: Single Board Computer Module
• For Use With/related Products: BL2130
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

4. Connect the programming cable to download programs from your PC and to program
Connect the 10-pin
RabbitCore module. Ensure that the colored edge lines up with pin 1 as shown. (Do not use
the
other end of the programming cable to a COM port on your PC. Make a note of the port to
which you connect the cable, as Dynamic C will need to have this parameter configured.
Note that COM1 on the PC is the default COM port used by Dynamic C.
12
and debug the BL2100.
DIAG
NOTE: Never disconnect the programming cable by pulling on the ribbon cable. Carefully
NOTE: Some PCs now come equipped only with a USB port. It may be possible to use an
pull on the connector to remove it from the header.
RS-232/USB converter with the programming cable supplied with the Tool Kit. An RS-
232/USB converter (part number 20-151-0178) is available through the
not all RS-232/USB converters work with Dynamic C.
connector, which is used for a nonprogramming serial connection.) Connect the
PROG
Figure 5. Programming Cable Connections
connector of the programming cable to header J1 on the BL2100
Web
Smartcat (BL2100)
store. Note that