101-0599 Rabbit Semiconductor, 101-0599 Datasheet - Page 25

• Manufacturer Part Number: 101-0599
• Description: COMPUTER SNGLBD BL2500 512K FLSH
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0599

• Module/board Type: Single Board Computer Module
• For Use With/related Products: BL2500
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

3.1.1 Headers
Standard Coyote models are equipped with five 1 × 10 friction-lock connector terminals
(J1, J3, J9, J11, and J12) where pin 9 is removed to polarize the connector terminals, a 2 × 5
RS-232 signal header, a 2 × 5 programming header, and an RJ-45 Ethernet jack on the
RabbitCore module.
The RJ-45 jacks at J4 and J5 labeled RabbitNet are serial I/O expansion ports for use with
digital I/O and analog I/O boards currently being developed. The RabbitNet jacks do not
support Ethernet connections. Be careful to connect your Ethernet cable to the jack labeled
Ethernet.
Two 4-pin 0.156" friction-lock connector terminals at J7 and J8 are installed to supply
power (DCIN and +5 V) to the peripheral cards currently being developed for use with the
RabbitNet. Two 2-pin 0.156" friction-lock connector terminals at J2 and J10 are for power
supply and +K connections.
Table 3 lists Molex connector part numbers for the crimp terminals, housings, and polarizing
keys needed to assemble female friction-lock connector assemblies for use with their male
counterparts on the BL2500.
User’s Manual
Friction-Lock
Connector
0.156" 1 × 4
0.156" 1 × 2
0.1" 1 × 10
Used with BL2500
J1, J3, J9, J11, J12
Table 3. Female Friction-Lock Connector Parts
Headers
J2, J10
J7, J8
Molex Housing
Part Number
22-01-2107
09-50-3041
09-50-3021
Crimp Terminals
08-50-0108
08-50-0113
Molex
Polarizing Keys
15-04-9209
15-04-0219
Molex
19