20-101-0673 Rabbit Semiconductor, 20-101-0673 Datasheet - Page 98

• Manufacturer Part Number: 20-101-0673
• Description: MODULE RABBITCORE RCM3610
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0673

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Core Processor: Rabbit 3000
• Clock Speed: 22.1 MHz
• Interface Type: Serial
• Flash: 256 KB
• Timers: 10 x 8 bit, 1 x 10 bit
• Operating Supply Voltage: 3 V to 3.6 V
• Board Size: 31 mm x 54 mm x 16 mm
• Core: RCM3610
• Processor Series: RCM3600
• For Use With/related Products: RCM3610
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1103

C.5 Install Connectors on Prototyping Board
Before you can use the LCD/keypad module with the RCM3600 Prototyping Board, you
will need to install connectors to attach the LCD/keypad module to the RCM3600 Proto-
typing Board. These connectors are included with the RCM3600 Development Kit.
First solder the 2 x 13 connector to location LCD1JA on the RCM3600 Prototyping Board
as shown in Figure C-7.
• If you plan to bezel-mount the LCD/keypad module, continue with the bezel-mounting
• If you plan to mount the LCD/keypad module directly on the RCM3600 Prototyping
92
instructions in Section C.7, “Bezel-Mount Installation.”
Board, solder two additional 2 x 7 connectors at locations LCD1JB and LCD1JC on the
RCM3600 Prototyping Board. Section C.6, “Mounting LCD/Keypad Module on the
Prototyping Board,” explains how to mount the LCD/keypad module on the RCM3600
Prototyping Board.
Figure C-7. Solder Connectors to RCM3600 Prototyping Board
RabbitCore RCM3600