20-101-1094 Rabbit Semiconductor, 20-101-1094 Datasheet - Page 108

• Manufacturer Part Number: 20-101-1094
• Description: MCU RCM4000 RABBITCORE
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1094

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Core Processor: Rabbit 4000
• Clock Speed: 58.98 MHz
• Interface Type: Ethernet, Serial
• Flash: 512 KB
• Timers: 10 x 8 bit, 1 x 10 bit, 1 x 16 bit
• Operating Supply Voltage: 3 V to 3.6 V
• Board Size: 47 mm x 61 mm x 20 mm
• Core: RCM4000
• Processor Series: RCM4000
• Cpu Core: Rabbit 4000
• For Use With/related Products: RCM4000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1139

Table B-1 lists the electrical, mechanical, and environmental specifications for the Proto-
typing Board.
B.3 Power Supply
The RCM4000 requires a regulated 3.0 V – 3.6 V DC power source to operate. Depending
on the amount of current required by the application, different regulators can be used to
supply this voltage.
The Prototyping Board has an onboard +5 V switching power regulator from which a
+3.3 V linear regulator draws its supply. Thus both +5 V and +3.3 V are available on the
Prototyping Board.
The Prototyping Board itself is protected against reverse polarity by a Shottky diode at D2
as shown in Figure B-3.
102
Board Size
Operating Temperature
Humidity
Input Voltage
Maximum Current Draw
(including user-added circuits)
Prototyping Area
Connectors
Parameter
Table B-1. Prototyping Board Specifications
Figure B-3. Prototyping Board Power Supply
3.80" × 3.80" × 0.48" (97 mm × 97 mm × 12 mm)
0°C to +70°C
5% to 95%, noncondensing
8 V to 24 V DC
800 mA max. for +3.3 V supply,
1 A total +3.3 V and +5 V combined
1.3" × 2.0" (33 mm × 50 mm) throughhole, 0.1" spacing,
additional space for SMT components
One 2 × 25 header socket, 1.27 mm pitch, to accept RCM4000
One 1 × 3 IDC header for power-supply connection
One 2 × 5 IDC RS-232 header, 0.1" pitch
Two unstuffed header locations for analog and RCM4000 signals
25 unstuffed 2-pin header locations for optional configurations
Specification
RabbitCore RCM4000