EP2S60F1020C3N Altera, EP2S60F1020C3N Datasheet - Page 41

• Manufacturer Part Number: EP2S60F1020C3N
• Description: IC STRATIX II FPGA 60K 1020-FBGA
• Manufacturer: Altera
• Series: Stratix® IIr

Specifications of EP2S60F1020C3N

• Number Of Logic Elements/cells: 60440
• Number Of Labs/clbs: 3022
• Total Ram Bits: 2544192
• Number Of I /o: 718
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 1020-FBGA
• Family Name: Stratix II
• Number Of Logic Blocks/elements: 60440
• # I/os (max): 718
• Frequency (max): 816.99MHz
• Process Technology: 90nm (CMOS)
• Operating Supply Voltage (typ): 1.2V
• Logic Cells: 60440
• Ram Bits: 2544192
• Operating Supply Voltage (min): 1.15V
• Operating Supply Voltage (max): 1.25V
• Operating Temp Range: 0C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 1020
• Package Type: FC-FBGA
• For Use With: 544-1700 - DSP KIT W/STRATIX II EP2S60N544-1697 - NIOS II KIT W/STRATIX II EP2S60N
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Compliant
• Other names: 544-2369; EP2S60F1020C3N

Figure 2–21. M4K RAM Block Control Signals
Altera Corporation
May 2007
Dedicated
Row LAB
Clocks
Local
Interconnect
Local
Interconnect
Local
Interconnect
Local
Interconnect
Local
Interconnect
Local
Interconnect
Local
Interconnect
Local
Interconnect
The M4K RAM blocks allow for different clocks on their inputs and
outputs. Either of the two clocks feeding the block can clock M4K RAM
block registers (renwe, address, byte enable, datain, and output registers).
Only the output register can be bypassed. The six labclk signals or local
interconnects can drive the control signals for the A and B ports of the
M4K RAM block. ALMs can also control the clock_a, clock_b,
renwe_a, renwe_b, clr_a, clr_b, clocken_a, and clocken_b
signals, as shown in
The R4, C4, and direct link interconnects from adjacent LABs drive the
M4K RAM block local interconnect. The M4K RAM blocks can
communicate with LABs on either the left or right side through these row
resources or with LAB columns on either the right or left with the column
resources. Up to 16 direct link input connections to the M4K RAM Block
are possible from the left adjacent LABs and another 16 possible from the
right adjacent LAB. M4K RAM block outputs can also connect to left and
right LABs through direct link interconnect.
RAM block to logic array interface.
6
clock_a
clock_b
Figure
clocken_a
2–21.
clocken_b
Stratix II Device Handbook, Volume 1
renwe_a
Figure 2–22
renwe_b
Stratix II Architecture
aclr_a
shows the M4K
aclr_b
2–33